NATIKA HD Backup camera for 2007-2018 Jeep Wrangler JK support 2 location mount option, mounting at 12 o'clock or 6 o'clock on the spare, no distorted & no-fish-eye effect, 0.005Lux starlight level night vision, IP69K IP rating reliable waterproof and horizontal 135 degrees wide view angle. This spare tire mount rear view camera for Jeep Wrangler JK 2007-2018 with 2 useful wire loops: Cut the GREEN wire loop to remove the distance guidelines. Cut the WHITE wire loop to choose AHD format (720P, 30fps, NTSC) video signal output. Please power on again after you cut any color wire loops, then the image should be correct. Note: this camera is a Spare Tire Mount HD Backup camera for Jeep Wrangler JK 2007-2018 with the guidelines and CVBS format video signal output as DEFAULT. The distance guidelines will disappear after you cut the white wire loop, regardless of whether you cut the green wire loop,then you can use the head unit's self- existent distance guidelines. What you get: 1 x NATIKA Backup camera for Jeep Wrangler; 1 x 19.69ft/6M Extension Wire/Cable; 3 x Retaining Clips; 1 x Factory radio adapter; 1 x Panel Remover; 7 x Zip Ties; 1 x Electrical Tape; 1 x User Manual; 1 x Thanks Card; 1 x NATIKA Gift Box HD backup camera for Jeep Wrangler JK 2007-2018 support both CVBS and AHD format video signal option(great for Android stereos). CVBS by default,cut the white wire loop to choose AHD format(720P,1280720pixels) video signal output, It is much clearer than CVBS(960H,960576pixels) image.Also It with starlight level night vision (0.005Lux, excellent low-light performance), you never worry about parking at night or in dark garage. HD rear view camera for Jeep Wrangler JK 2007-2018 support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, you absolutely no need to worry about water, fog or mist inside. CAUTION: Before you cut this HD rear camera for Jeep Wrangler JK 2007-2018’s white wire loop to choose AHD format (720P 30fps NTSC) video signal output, please make sure your Android stereo support AHD video signal input first(most of old Android OS and Japanese brands stereos do not support it), and it works well on selected ATOTO stereos (can work well on F7 Series, S8 series and A6 KarLink version and can not work on ATOTO A6Y Series Android stereo or SA102 Starter). Keep this spare tire mount HD backup camera for Jeep Wrangler JK 2007-2018’s short camera wire and 26ft extension wire away from high temperature area, such as engine or exhaust. Also please clean this spare tire mount backup camera’s lens regularly to free it from dirt, water drops, snow drops and etc. This HD backup car camera for Jeep Wrangler JK 2007-2018 doesn’t fit sucked type dash cams and mirror dash cams, because these dash cams have different connectors and PIN definition, even some of them with same 4 PIN connector. If connect this HD reverse camera for Jeep Wrangler JK 2007-2018 to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation. After install this HD backup car camera for Jeep Wrangler JK 2007-2018, if the image on the screen is blurry, flickering/flash,black, black-and white, has horizontal or vertical strip, please check all your power and video connections to make sure all of them are solid. Possibly use a different ground point(iron/metal part) and wrap power and video plugs with electrical tape to insulate from interference. If it still can’t be solved, please order a DC 12V power adapter filter rectifier or relay to clear the video signal. This HD rear view camera for Jeep Wrangler JK 2007-2018 is perfect for rear only,head unit NOT include. If you use T-taps to connect this HD reverse camera for Jeep Wrangler JK 2007-2018 to power source (reversing light), please kindly check and see if it works (connection is solid or not). Before you routing this spare tire mount HD backup car camera for Jeep Wrangler JK 2007-2018’s 19.69ft extension wire inside of vehicle body, if there is no image on the screen, other than check the backup car camera, please check the video input setup, find the button “R-CAM Interrupt”and choose “ON",then start to test backup camera. You can use other device with RCA connector, such as TV or a small 4.3”/5” /7” monitor to check if the camera works, because the issue come from the head unit, not backup camera some times. If you want to adjust this 720P AHD backup camera for Jeep Wrangler JK 2007-2018's view angle, just use your hand to move up or down the camera body. If this 720P AHD reverse camera for Jeep Wrangler JK 2007-2018 is mounted offset, the guidelines on image will be offset. This 720P AHD rear view camera for Jeep Wrangler JK 2007-2018’s output video signal system is NTSC, so your head units or control boxes’ signal input have to be setting up to be NTSC, NOT PAL. Starlight Level Night Vision 720P AHD 2007-2018 Jeep Wrangler JK HD rear camera 720P AHD/CVBS Starlight Level Night Vision Backup Camera allows you to see more clearly and keep safe in day and night! High Resolution (720P 1280720 pixels 1000TVLs AHD format video signal option). Say goodbye to blurry,foggy,fuzzy,hazy,grainy,distorted low resolution picture! NATIKA HD backup camera for 2007-2018 Jeep Wrangler JK built-in a LATEST high sensitive starlight level 720P FULL HD 1/2.7 inches latest 5th GEN image sensor and a latest 4th GEN digital high-definition image processor ISP(support 3D noise reduction), the effective pixels is 1280720 pixels(1000TVL) base on AHD format video signal output and 960576 pixels (600TVL) base on CVBS format video signal output, and the low illumination level is 0.005Lux/F1.2, also with a Grade A 6G All-glasses and F1.8 large aperture lens, so it presents you a amazing starlight level clear images even in very dark areas (at night or in dark environments,such as garage). Read more How to choose 720P AHD format video signal input from your aftermarket Android OS head unit? Monitor/Screen/TFT Compatibility Beware This spare tire mount HD backup camera for 2007-2018 Jeep Wrangler JK doesn’t fit sucked type dash cam and mirror dash cam, because dash cam have different connectors and PIN definition, even some of them with same 4PIN connector. If connect this vehicle backup camera to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation. Factory Radio’s port and plug If your head unit is a 6.1” FACTORY RADIO,please find this port which behind the factory radio and plug the existing harness & adapter to activate the camera input with your 6.1” FACTORY RADIO. Useful adapter & harness for 6.1” FACTORY RADIO This spare tire mount HD reverse camera for 2007-2018 Jeep Wrangler JK works with any aftermarket head units which with a RCA connector. When using it with a 6.1” FACTORY RADIO, have to add this harness & adapter to integrate the camera with it.Additional programming will be required to activate the camera input with your Jeep Wrangler factory radio and can be done at your local Jeep dealership or DIY: buy a Vgate iCar Pro Bluetooth 4.0 (BLE) and use Jscan (order it from play store) and purchased 1 license to turn the backup camera function on by yourself. Between those 2, it is another usd50-usd60. Read more CVBS and AHD format video signal option HD rear view camera for 2007-2018 Jeep Wrangler JK WD-J01 support both CVBS and AHD format video signal output(great for big screen Android stereos). AHD format video signal image is much clearer than CVBS,CVBS image’s is 600TVL(960576 pixels), the AHD is 1000TVL(1280720pixsl). NO fish-eye & distorted effect picture NATIKA HD backup camera for 2007-2018 Jeep Wrangler JK WD-J01 built-in a LATEST high sensitive STARLIGHT LEVEL night vision HD 1/2.7inch fifth generation CMOS image sensor and a fourth generation digital high-definition image processor ISP(support 3D digital noise canceling technology), also it with a LATEST 6pcs FULL glasses F1.8 large aperture optical system and horizontal 135 degree wide view angle lens, the picture without any fish-eye & distorted effect,you will get a crystal realistic view when you backing up. Wide Applicable Temperature NATIKA spare tire mount HD backup camera for 2007-2018 Jeep Wrangler JK built- in wide range temperature electronic parts and components, the range is from -22℉ to +185℉(-30℃ to +85℃), it is great weatherproof and can work perfectly not only in the high temperature summer but also in cold winter or snowy weather, also outlasts harsh weather like thunderstorms, rain and more, in short it can adapt to all kinds of bad weather. Read more Amazing Night Vision NATIKA spare tire mount HD rear view camera for 2007-2018 Jeep Wrangler JK shows you clear picture even in very dark areas, such as out of doors at night or inside of garage, because it built-in a latest 1/2.7inch 0.005Lux,excellent low-light performance high sensitive 5th GEN CMOS sensor and 4th GEN Digital high-definition image sensor processor ISP(support 3D digital noise canceling technology),also with a grade A 6G All-glass and F1.8 large aperture lens, delivers sharp and crystal clear picture day and night. Useful Wide and Real View Angle NATIKA spare tire mount HD reverse camera for 2007-2018 Jeep Wrangler JK built-in a LATEST Grade A 6G All-glass and F1.8 large aperture lens, the lens' horizontal angle is 135 degrees(visible range up to 95%), thanks to the 135° viewing field, you'll be able to see far more than you could in the rear view mirrors alone. It helps you to decrease blind zone accidents very well.(your kids and pets will be more safe behind or in front of your vehicles).