Learn the best of the PLC programming

Supplied: 

1 PLC FX Board Controller 20 i/o; 12 DC Inputs, 8 Relay Outputs
1 USB Interface Programming Cable
1 Power Supply 24V input 120/240VAC

Software for Windows 10, 32bit.  Software  is FREE, cost include examples and data compilation

BONUS a training course in ladder logic, from the basic functions to advanced applications as used in the industry today.

2 - Hardware  Features:  FX1N-20mr

• PLC with 12 Inputs and 8 Relay Outputs
• This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
• High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
• Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
• Programming port is the port for program upload, download, test and monitor.
• It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.

Specifications:
Model: FX1N-20mr
Operating Voltage: DC24（V）
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G

 
 
Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:

• Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
• When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
• The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
• Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
• When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
• Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
• When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
• Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
• When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.

These are just some examples, modules can achieve far more than these functions

• Input high speed pulse C235, C251 and FX1N compatible.
• Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.

Precautions for use:

• The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
• Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
• Built-in Analog output DA, corresponding to internal data register D5101.
• When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.

DISCLAIMER
For technical assistance

Please contact a Certified professional  or a Mitsubishi PLC Specialist

Mitsubishi PLC, GX-Developer, GX-work2. are a registered trade marks of Mitsubishi Electric

Windows is registered trade mark of Microsoft Corporation

Copyright 2018