COMICA BoomX-D MI2 Dual Digital Wireless Microphone System for iOS Devices iPads.


Description


COMICA BoomX-D MI2 2-Person Digital Wireless Microphone System for iOS Devices

The Comica BoomX-D MI2 is a wireless digital microphone system that plugs directly into the Lightning port of your iPhone or iPad. It offers a complete solution for recording dialogue, interviews, and speech for 2 persons. Real-time audio monitoring.


Lightning Port Solution

The Comica BoomX-D MI2 is an ultracompact, dual-channel digital wireless receiver that mounts on and plugs directly into the Lightning port of your iPhone or iPad. This is a true wireless digital microphone system with two microphone and a dual-channel receiver. It offers a complete solution for recording dialogue, interviews, and speech with two person talking. The ultralightweight BoomX-D MI2 consists of two ultracompact clip-on transmitters each with its own built-in omnidirectional microphone and a separate lavalier microphone. It also comes with a tiny receiver that mounts on and plugs directly into the Lightning port of your phone. To ensure that you are capturing a clean signal, you can monitor your mic via the receiver's 3.5mm headphone output while recording. The system delivers reliable transmission with a clear sound at a distance up to 50m. The transmitter's built-in rechargeable battery provide up to 5 hours of operation. Versatile and extremely easy to use with simple controls, the BoomX-D MI2 is well suited for content creators of any experience level.


Built-In Mics for True Wireless

Each transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphone. For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent. You can also hold the transmitter in your hand and use it as a handheld microphone. The On/Off switch doubles as a mute button. For a more discreet setup, use the small lavalier microphone, which can be easily concealed away from the camera's eye.


Plug-and-Play and Easy-to-Operate Wireless

This plug-and-play system is easy to use. It comes pre-paired at the factory; connect it to your camera, turn it On, and you're ready to start recording. Dedicated gain buttons on the receiver allow quick and effortless adjustment of the signal level for each microphone independently. The transmitters have a display that shows signal strength, audio level, and battery life. The transmitters are powered via a built-in lithium-ion rechargeable battery. They can also be powered via USB, even while in use, giving you near unlimited operating time. The receiver is powered via the phone.


Easy 2.4 GHz Digital Wireless

Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the BoomX-D digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems. The system automatically changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 50m. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.


Inside the Box:

1 x Receiver (RX)

2 x Transmitter (TX)

2 x Mic audio cable with 3.5mm Connector

1 x USB Charing cable

2 x Wind Muffs

1 x Reset Pin

1 x User Manual


Features: