Portable Data Logger Findlay Irvine DCU 390

The DCU 390-P has been designed for use in temporary

remote condition monitoring or data logging applications for

track assets and is part of the DCU390 family of loggers all

of which have full NR product acceptance.

Designed for real life conditions the DCU390-P is supplied

built in to a ruggedized weatherproof case with up to 10

hours battery life.

Designed to meet and exceed Network Rails current data

logger standard (NR/L2/SIG/30036) and Intelligent

Infrastructure Remote Condition Monitoring system (II-RCM-

Interface-Spec).

Current in built applications are for point machine monitoring. Other configurations will

be available soon.

The DCU390-P can be supplied with a set of current transformer clamps to suit the

application.

• Each DCU390-P has 6 Analogues and 4 Digital

inputs

• Inbuilt colour touch-screen display and

indicators for inputs status, configuration and

local diagnoses

• Historical data including traces can be reviewed

on the LCD screen

• Trace comparison functionality built in

• Communication via GPRS

• Time synchronisation is through network servers

or GPS receiver

• Up to 10 hours battery life

y voltage: 110Vac

Supply current: 0.8A at 110Vac RMS

Battery backup supply: Rechargeable, up to 10 hours, charger included

Operating Temperature: -20 to +60°C

Electrical Isolation: >4Mohm measured at 250Vdc to Earth.

Dimensions: 160 x 370 x 300mm (HxWxD) approx.,

IP Rating IP66

Weight: 4.5kg

Memory: 64-256MB 266MHZ DDR SDRAM

128Mbytes - 1Gbytes Flash Disk

Inputs/Outputs: 6 analogue inputs, voltage or 4-20mA

4 isolated digital inputs

Other configuration may be possible

Analogue Sample Rate: Up to 1kHz per channel

Clock: Real time clock with battery supply

Data Memory: One internal SD Memory card for data backup

Controls and Indicators: QVGA Colour touch screen LCD Status Leds

GPRS Modem GPRS Class 10, PBCCH support, Coding Schemes: CS1 to CS4,

Embedded TCP/IP Stack

Sensors Kits Various current clamp transducers kits with extension leads can be

supplied to suit the application

FI Part Number I991644

Network Rail 0055/162705

DCUView Remote display software

DCUView is a software package, which allows remote access to the logger to extract data, reprogram,

and update configurations.

DCUConfig DCU configuration software

DCUConfig is a software package allowing a configuration file to be created for a DCU Master or Slave

Unit. This configuration file can then be uploaded to the Master or Slave unit either locally via a USB

memory stick or remotely via FTP or DCUView. The configuration includes the Input Output map and

also which asset types are being monitored. This allows replacement units to be easily re configured.

Dcu 390-P