Description
The first gen Firebird went on sale February 23, 1967 with five different engine options offered, each with slightly different trim levels. The highest performing model in 1967 was the Firebird 400 that came with a very respectable (for the time) 325 horsepower. Pontiac started out strong in the sales department that first year, and while total production of 82,560 was the lowest of any pony car that year (except the Plymouth Barracuda), it should be noted that sales didn’t begin until mid-season.
While the Pontiac Firebird shared its F-body styling and other elements with its cousin, the Camaro, the cars are by no means identical. Much of the sheet metal is shared, but that’s where most of the similarities end. The split front grille was very Pontiac, as were the slit taillights that highly resembled those of the GTO. But the differences didn’t stop with the looks of the car. All five of the motors offered for the Firebird were exclusively made by Pontiac – no engines were shared between Firebird and the Camaro. And Pontiac wanted to highlight the engine options, and did so by selling the car as “five exciting versions,” even though the only two official models available were a hardtop and convertible version.
Details
Like all our designs, this one is treated with our signature ‘relic-ing’ process which includes our own secret recipe of hand-painted chipping, cracking, fading, and just the right touch of yellowing to ensure that it looks the part of a true vintage imprint.** We lay these works of art down on premium Bella+Canvas 3001 Unisex Jersey Short Sleeve Tees, one of the softest, best-wearing t-shirts available today, via state of the art direct to garment (DTG) printing which allows us to create a vintage effect that simply can’t be accomplished with other printing methods. In short, these shirts are everything you’ve dreamed of and more – it feels soft and lightweight with just the right amount of stretch making it comfortable and flattering for both men and women.
- 100% combed and ring-spun cotton*
- Fabric weight: 4.2 oz (142 g/m2)
- 30 single
- Tear-away label
- Shoulder-to-shoulder taping
- Side-seamed
- Retail fit
- Runs true to size
Sizing
Not sure what size is your best fit? We recommend taking one of your current t-shirts, laying it flat and measuring it. The measurements in the chart below are taken with the shirt laying on a flat surface. To get the length, measure from the high shoulder point down to the bottom of the shirt. To get the width, measure approximately 1-inch below the armhole, across the chest, from seam to seam. While our tees are all made using premium, pre-shrunk, ring-spun cotton, there can be some shrinkage depending on your personal wash and dry cycles. With that said, if you're on the fence, we always suggest going up a size.
|
S |
M |
L |
XL |
2XL |
3XL |
Width |
18 |
20 |
22.01 |
24.02 |
25.99 |
28 |
Length |
28 |
29.02 |
30 |
31.03 |
32.01 |
33 |
Sleeves |
8.9 |
9.18 |
9.45 |
9.73 |
10 |
10.4 |
All sizes are provided in inches!
*Heather colors are 52% combed and ring-spun cotton/48% polyester. Athletic and Black Heather is 90% combed and ring-spun cotton/10% polyester. Ash color is 99% Airlume combed and ring-spun cotton and 1% poly. **Due to the nature of the printing process and different sizes of shirts offered, imprint position and scale may vary slightly from the product images, but we do our best to be as accurate as possible.