Welcome
Product Description
Features:
1. Adopted opening high speed cooling fan design, less noise and better heat dissipation
2. Plug and play, easy to install
3. 0.1S instant start up
4. Integrated built-in drive, ALL IN ONE
5. Intelligent temperature control
Bulb Size: P22d/9006/HB4, P20d/9005/HB3/H10/9140/9145
To Fit: Headlight Globe
Type: Headlight Kit
Number of Bulbs: 4
Voltage: DC 12-24V
Wattage: 25W/Globe, 50W/Pair
Lumens: 3000LM/Globe, 6000LM/Pair
LED Chips: COB LED Chips
Material: Aviation 6063 aluminum profile
Operating Temperature: -40~80 degree
Color Temperature: 6500K Pure White
Lifetime: Over 30000 Hours
Warranty: 1 Year
Waterproof Degree: IP67
Package included
2x 9005 / HB3 LED Bulbs
2x 9006 / HB4 LED Bulbs
Note: This BULBS KIT don't come with CANBUS Error Free function.
-- After installing the LED bulb, the car needs to be decoded in the following cases:
1. The light flashes, strobe and indefinitely flashes.
2. The on-board computer reports an error, the central control panel displays an error code or displays bulb burns out error message.
3. The light bulb does not work. But connecting 12V DC can work normally, you can test whether there is a reverse polarity socket or need to decode.
-- Feasible solution
1. Install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need to ask the professional to install.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8. Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system).
9. After installation, dust prevention measures must be done, LED lamp life depends on the cooling performance is good or bad. The lamp heat mainly active cooling (fan-cooling based, supplemented by the whole aviation aluminum heat dispassion) as the main cooling method, the life of the fan in lamp bulb directly affects the life of LED lights.
FAQ Q1: Will the bulbs suitable for my vehicle? A:1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! Q2: What if I encounter a dashboard error message or flickering? A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. A:1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect. DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
|