Convert your manual boot release to electric release with this kit.

Great add-on to alarms with extra channels. Solenoid connects with existing boot latch or release cable. Comes with mounting bracket,  Solenoid kit and In Dash Button. Control from push button supplied or connect to suitable alarm system. If you want to connect this to a 3rd channel (auxiliary)  output on an alarm then you will also need an additional 5 pin relay.

 Technical Data:

  • Operating Voltage: DC12V
  • Load Current Consumption: 14A
  • Max Pull Range: 14mm
  • Quality Products at fantastic prices!

 Package Contents:
  • Mounting Bracket
  • Solenoid kit
  • In Dash Button
  • Screws + Nuts
  • Wirings



Notes *
Note 1. Central Locking
If your central locking system only operates from the drivers door key (not the passengers);
then you will need a   2 wire motor for your drivers door.
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit 

 

Note 4. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems

  Cable door lock adaptor