ADAMAT Performance from Poland offers:
Dampened flywhell kit for swap DCT GS7D36SG gearbox from BMW N54 / N55 / S55 engines to BMW B46B20 / B48B20 / B58B30 enignes
This Kit include:
- Flywheel made from lightweight aerospace alloy AlZnMg+Ti with the strength of 42CrMo4 steel. It features an integrated starter ring gear and a dampened spline hub that working as a dual-mass flywheel. The dampened spline hub is available in 5 torque configurations: 700 / 860 / 1056 / 1150 / 1300Nm. The maximum torque capacity depends on the selected springs and the ability to dampen engine harmonics while withstanding high loads. Weight of complete flywhell 8,5kg
- Tranmission adapter plate made from AW7075-T651 aluminum alloy, which surpasses the strength of S355 and C45 steel. Adapter plate thickenes 29mm
- Mounting screws for the flywheel, adapter, and gearbox.
- manual with installation process in pdf file CLICK TO DOWNLOAD IT
- warranty 12 months from delivery time
Flywhell set are fully dynamic ballanced.
| Kit dedicated for engines | BMW B46B20, B48B20, B58B30 |
| Supported tranmissions | Any DCT tranmission GS7D36SG from 6 cylinder engines N54 / N55 / S55 available in BMW models BMW E92 / E93 / F80 / F80N / F82 / F82N / F83 / F83N / F87 M2 / F87N |
| Available versions of the vibration damper installed on the flywheel. Please specify the version when placing an order, based on the principle of planned torque + 70Nm. We are here to assist you in selecting the appropriate configuration. |
700Nm 860Nm 1056Nm 1156Nm 1300Nm |
Why you shlud choose our solutions?
-We have over 15 years of experience in motorsport, specializing in providing high-performance clutches for manual transmissions in powerful street cars and heavily turbocharged engines used in drifting, racing, rallying, and drag racing. Additionally, we have 5 years of experience in producing conversions for 8HP automatic transmissions and DCT transmissions.
-For measurements, we use a modern 3D scanner ATOS GOM, which provides high measurement accuracy. The maximum volumetric measurement error is <0.002mm. Additionally, if the highest measurement accuracy is required, our workshop is equipped with FARO GAUGE measuring arm.
-For design, we use legal software from Dessault System Solid Works Professional. Regular subscriptions ensure that we always work with the latest software version.
-In production, we use CNC machines from DMG MORI, which are regularly inspected and serviced. The machining accuracy is no worse than 0.01mm, ensuring excellent alignment of gearboxes with engines. According to international ITAR regulations, machines commonly used in the industry cannot have a positioning accuracy greater than 0.006mm.
-We use only the highest quality certified materials in our production, such as special aluminum alloys AlZnMg+Ti with titanium additives for flywheel production. These alloys offer the same strength as 42CrMo4 steel while being lighter in weight. Our adapters are made from an aluminum alloy called AW7075-T651, also known as Fortal. This alloy is nearly three times stronger than the popular AW2017 aluminum. We collaborate with suppliers from the EU and the USA for the delivery of strategic materials.
-We use hight quality CIMAT dynamic balancer then you have 100% sure that assembled rotary parts are 100% quality and dont destroy your engine
-We do not import materials or outsource production from China manufacturers.
-For measurements, we use a modern 3D scanner ATOS GOM, which provides high measurement accuracy. The maximum volumetric measurement error is <0.002mm. Additionally, if the highest measurement accuracy is required, our workshop is equipped with FARO GAUGE measuring arm.
-For design, we use legal software from Dessault System Solid Works Professional. Regular subscriptions ensure that we always work with the latest software version.
-In production, we use CNC machines from DMG MORI, which are regularly inspected and serviced. The machining accuracy is no worse than 0.01mm, ensuring excellent alignment of gearboxes with engines. According to international ITAR regulations, machines commonly used in the industry cannot have a positioning accuracy greater than 0.006mm.
-We use only the highest quality certified materials in our production, such as special aluminum alloys AlZnMg+Ti with titanium additives for flywheel production. These alloys offer the same strength as 42CrMo4 steel while being lighter in weight. Our adapters are made from an aluminum alloy called AW7075-T651, also known as Fortal. This alloy is nearly three times stronger than the popular AW2017 aluminum. We collaborate with suppliers from the EU and the USA for the delivery of strategic materials.
-We use hight quality CIMAT dynamic balancer then you have 100% sure that assembled rotary parts are 100% quality and dont destroy your engine
-We do not import materials or outsource production from China manufacturers.
