Updating your iDrive software is only required in a limited range of situations. For example, if you want to activate a specific feature (like Fullscreen mode for Apple CarPlay), but it isn't supported by your vehicle's current software version, updating your software could be the answer. It may also be the solution when running into compatibility issues with third-party hardware that isn't designed to work with older iDrive software versions.

Without a clear goal in mind or a specific problem that needs fixing, your BMW will almost always require a software update.


You will also receive

  • Free car diagnose with official dealer software.
  • Faults deletion after flashing. 
  • List with actual car faults
  • ECU Tree List, with car information

Check your unit version:

Check your current Map and iDrive version:
Go to Navigation -> Scroll down to Settings -> Select Position & Version -> Select Version Information


Select NBTevo Version

HMI : I-Level

Check your current Software version:

Select My Vehicle -> iDrive settings -> Software update -> Show current version

Road Map “Region” EVO = NBTevo unit

NBTevo_G to W -> upgrade to iD6 version X with CarPlay Full Screen is possible


Requirements

– Laptop – Windows 8, 10 or 11.

– Laptop RAM : minimum 4GB – recommended 8GB or higher.

– Files– After purchase, go to “My Account -> Downloads” and you can download the required files needed for the upgrade process.

– ENET Cable – You need to buy it online or do it yourself. Click here how : DIY ENET Cable Build

– DO NOT use Ethernet to USB 2.0 Adapters. Only USB-C is accepted.

– Windows C drive free space 20GB (SSD recommended)
– Power Stabilizer for the car battery, or Jumper Cables with additional vehicle.

– Strong Wi-Fi/Internet Connection – This ensures that the TeamViewer connection to your laptop is stable.

We will connect remotely on your laptop and we will do the flash for you. You just sit back and relax!


Steps

1. After you place the order, you need to go to your Account -> Downloads , download and unzip on desktop the files needed for upgrade.

2. Download TeamViewer, from teamvier.com and install it! You can ping me on WhatsApp or Email to schedule a booking.

3. We will connect remotely on your computer and install the upgrade files (E-Sys, psdzdata etc.)

4. Connect a Windows 8,10,11 laptop to the car through an ENET Cable . If your laptop doesn’t have an ethernet plug, you can use an USB 3.0 or USB-C Adaptor

5. Plug a battery charger for the car’s battery.

6. We will start the flash (upgrade) – It will take 45 minutes

7. After flash (upgrade) is finish then we will inject the FSC and activate maps and CarPlay

8. We will clear all the car errors

9. Test CarPlay and everything else.

10. Leave review (optional) 🙂