Our decals are made from high quality permanent Oracal vinyl, which is commonly used by professional signwriters.

Each decal consists of three layers - the white backing paper, the vinyl decal and the transparent transfer tape.

Yes, our decals are made from vinyl that is waterproof, weatherproof and fade resistant.

We cannot guarantee that they will be resistant to extreme heat, so please do not place items you've applied the decal to in the dishwasher, oven or microwave.

Our decals can be applied to car windows, laptops, mobile phones, tablets, glass, doors, books, notebooks, hard plastics and any other clean flat non-porous surface.

It is not recommended to apply our decals to painted surfaces as the decal may lift and damage the paint if you wish to remove it in the future.

If you wish to apply a decal permanently to a wall then go for it! It will stick fine.

However, if you wish to remove the decal in the future we do not recommend it as it may lift and damage the paint on removal.

Please refer to the instructions below. These instructions will also be included in the package with your decal.

Your decal is made up of 3 layers - the white backing paper, the vinyl decal and the clear transfer tape.

Step 1 - Clean the surface where you want to stick your decal, using the included isopropyl alcohol wipe. Allow to air dry.

Step 2 - Before application place the decal on a flat surface like a table and rub firmly with a credit card or squeegee, up and down and side to side. Flip decal over and do the same on the other side.

Step 3 - From one corner slowly and carefully peel back the clear transfer tape from the white backing, ensuring that the decal adheres to the clear transfer tape. Be extra careful with parts of the design that are small and delicate. If parts of the vinyl are not sticking to the clear transfer tape, go back and repeat Step 2 on those parts.

Step 4 - Carefully position the sticker on to the desired surface. Once the vinyl sticks it will be nearly impossible to resposition without destroying the decal. Rub the sticker from one side to the other with your hand, to adhere it down and eliminate any air bubbles. Do not remove the transfer tape yet.

Step 5 - Rub the sticker firmly with a credit card or squeegee, up and down and side to side, to make sure the decal is fully adhered to the surface.

Step 6 - Slowly and carefully peel back the clear transfer tape from one corner, ensuring that the vinyl decal sticks to the surface and does not remain on the transfer tape. Be extra careful with small and delicate parts of the design. If parts of the vinyl are not sticking to the surface, go back and repeat Step 5 on those parts.

Our decals are made with permanent vinyl and are generally for a single, permanent use, so they usually cannot be re-used after removal.

To remove your decal in the future, in most cases, they can be removed by picking at the edge and simply peeling off. Using a hair dryer on the decal to soften the adhesive will help this process.

For decals that have been stuck to a surface for a long time a plastic paint scraper will help to remove it.

Once the decal has been removed, clean the area with glass cleaner, degreaser or an adhesive-removing cleaner.

Our decals are lovingly made in our studio located in Brisbane, Australia.

Yes! Express shipping is available within Australia. Please select the option during checkout.

Please note that our decals are made to order, and that large volume orders may take up to 3 business days processing before they are shipped out. Small orders (up to 5 decals) will be shipped same day if ordered before 12:00pm.

Our free shipping within Australia does NOT include tracking, however we have the option to add tracking which can be selected during checkout.

Yes, we certainly do offer international shipping by regular letter surface mail.

However, we unfortunately cannot offer tracking or express post internationally.