- FOR ANY BOTTLES: From round wine bottle to square whisky bottle, you can easily cut most bottles you like with this bottle cutter unless the bottle is embossed.
- EASY TO USE: Just put the bottle on the cutter and rotate the bottle to score it and separate it with hot and cold water.The upgrade version helps you rotate the square bottle easily as well.
- ECO-FRIENDLY: Instead of discarding the bottle, making square lamps with square bottles, creating a candle lamp or a vase with round bottles.
- CREATIVITY: There are various of DIY activities in our daily lives to stimulate your ingenuity and imagination for adorning the bottles with different artworks, thus, teeming your life with great joy. Even you are a green hand, the attached instructions is filled with 15 creative ideas for you to enjoy DIY pleasure.
- PACKAGE INCLUDES: 1* glass bottle cutter, 1* user manual, 2* wheels, 4* sandpapers, 1* hexagonal spanner, 1* scale card ( small ruler) and 1* after-sale service card.
Product Description
Description:
- FIT MOST BOTTLES: With width adjustment 0.8"-2.7" and length adjustment 2.4"-5.9", this type of glass bottle cutter is suitable for most bottles, containing wine bottles, beer bottles, whisky bottles and champagne bottles etc. However, anaglyptic bottle cutting is unacceptable.
- SPECIALIZE IN SQUARE & ROUND BOTTLE CUTTING: No longer confined to round bottles cutting, we also design it for cutting square bottles. Therefore, you can cut almost all bottles that you actually prefer with this strong and tough glass bottle cutter.
- FILL YOUR LIFE WITH HAPPINESS: From home to office, you can use this bottle cutter to DIY anything you like, such as making it into wind chimes to decorate your garden or into chandeliers with all kinds of bottles to embellish your cozy house.
Specification:
- Bottle Cutting Type: Round & Square Bottle
- Product Size: 7.9 * 3.9 * 2.2 inch
- Package Size: 8.5 * 4.3 * 3.1 inch
- Package Weight: 1.5 lb
For Square Bottles & Round Bottles & the Neck of Round Bottles
Step 1: Adjusting the Machine
- Mount the attachments: You need to mount the attachments as the picture shows.
- Adjust the cutting length and width: When estimating the width of two rear rollers, you also need to make sure there is enough space for the square bottle.
- Adjust the blade: Loosen the up screw with the hex wrench, adjust the blade of the cutting wheel, and then tighten it firmly.
Step 2: Etching the Glass
- Place the bottle on the machine with the vertical flat side of the bottle against the straight edges of the front and back attachments.
- Set the blade forward to keep it in contact with the glass corners.
- Apply pressure as you rotate the bottle toward one direction with two hands.
- Set the blade straight up when you are etching the flat surface.Keep it firmly against the backstop and keep it moving while you're making the etching.
Step 3: Separating the Bottle
People often use one of these two methods to separate the bottle. You can choose one of them.
Method A. The Flame Method
This method is most commonly used. A burning candle and an ice cube are required for this method.
Method B. Use Hot and Cold Water
Using this method, you will need to alternate between "almost boiling water" and "cold tap water."
Step 4: Smoothing the Edge
- Rub the inside and outside edges lightly with a piece of coarse polishing paper.
- Sprinkle a small amount of the polishing powder(Not Included) on a flat, hard surface. You can also use a glass or metal pie plate or a piece of window glass.
- Dip the edge of the glass in water and then place it on the polishing surface. Start to grind in a circular motion. After a short time, the edge of the glass will become perfectly flat and have a dull, gray appearance.
- Again, smooth the inside and outside edges with the polishing paper.
| DIY Anything You Like | Upgraded version bottle cutter with 8 supporting wheels, lateral plate and extension hold blade | Middel roller for extra support & removable blade for flexing cutting | Smooth cutting & easy use, Suitable with most of beer/wine/drinking glass round bottles | 6 Cutting Blades which can get get smooth, clean cutting. Designed with 2 notches, helping you to snap off pieces of glass | Blade 2 packs | Blade 2 packs |
-
| Item model number |
Glass Bottle Cutter, Square & Round |
| Batteries required |
No |
| Product Dimensions |
7.09 x 3.15 x 1.97 inches |
| Item Weight |
1.5 pounds |
| Is Discontinued By Manufacturer |
No |
