 |
|
 |
AUTOOL BT360 car battery tester is dedicatedly developed to test 12V regular flooded, automotive lead-acid batteries, AGM flat plate, AGM spiral, GEL, and EFB batteries. It provides techs or DTYers with a quick, simple and cost-effective solution to know the battery's charging status better , check the battery's health and detect faults. |
|
Why do we need to test the car battery? Most of the batteries used for car startup are lead-acid batteries, and the most important feature of lead-acid batteries is that as the batteries are used, the pole plates gradually age. When the capacity is reduced to 80% of the rated capacity, the battery performance will decrease drastically. Although the car battery is still capable of providing some energy, it may fail at any time. So if the capacity of the car battery is reduced to 80% of its original rated capacity, this car battery needs to be replaced. Why do we choose AUTOOL BT360 battery tester? The AUTOOL BT 360 battery tester helps to prevent failed starts and roadside failures in cold weather driving situations. It is also possible to monitor the status of the car battery and fix its potential problems. Regular inspection of the battery in daily life can extend its service life and ensure that the battery is working at its optimal level. |
|
 |
Operation Steps of AUTOOL BT360 Car Battery Tester: Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole. Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds. Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine. Test completed. Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds, then press OK. Test completed. |
 |
 |
| Specification: Testing range(CCA):40-2400CCA Testing voltage: 12V Compatibility:Regular Flooded/AGM Flate /Gel/EFB Working Environment Temp:-20°C-50°C Size:190mm x 170mm x 60mm |
Package Include:
1pc* AUTOOL BT360 Car Battery Load Tester 2pcs* Full copper core kelvin clip 1pc* User Manual |
 |
|
