Used working pull from a server being dismantled. Has been used in a clean server room.
Fan on these systems are loud by design, but there are no buzzing noise.

Cosmetic condition is very good. Some light scratches from manipulation.
NO swollen capacitors.

Connectors are as follow:
- 1x ATX 24-Pin
- 1x 4-Pin 12V P4
- 2x 8-Pin EPS 12V
- 11x 4-Pin Molex
- 1x 4-Pin Floppy Drive
- 1x 2-Pin motherboard connector (Yellow-Black) for Buzzer Reset switch
- 1x 2-Pin motherboard connector (Red-Black) for TTL Signal

PLEASE NOTE: Only 2 brackets of the 4 possible are present. See pictures for more details.

Includes the following:
- Zippy Emacs 3U 650W 100-240V 2+1 Redundant EPS Power Supply (M/N: R3G-6650P)
- 3x Redundant Power Modules (M/N: GIN-6350P / P/N: B010780007)
- Holding Bracket

No mounting screws, power cord or other accessories included.

--------------------------
>>> SPECIFICATIONS
--------------------------

INPUT CHARACTERISTICS:
- VOLTAGE: 90 ~ 264 VAC FULL RANGE
- FREQUENCY : 47 ~ 63 Hz
- INPUT CURRENT: 9.0 / 5.0 A FOR 115 / 230 VAC
- INRUSH CURRENT: 80A / 100A MAX. FOR 115 / 230 VAC PER POWER MODULE

OUTPUT CHARACTERISTICS:
- TEMPERATURE RANGE : OPERATING 0C --- 40C, STORAGE –20C --- 70C
- HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
- DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 MINUTE
            INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
- EFFICIENCY: 63% TYPICAL, AT FULL LOAD
- POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
- OVER LOAD PROTECTION: 110 ~ 160% MAX.
- OVER VOLTAGE PROTECTION: +5V -> 5.7V ~ 6.7V, 3.3V -> 3.7 ~ 4.7V, 12V -> 13.0 ~ 15.0V
- SHORT CIRCUIT: 5V,12V, 3.3V, AUTO-RECOVERED : 5VSB, -5V, -12V
- EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
- SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
- REMOTE ON / OFF CONTROL
- FAULTY ALERT METHODS : LED, BUZZER, TTL SIGNAL
- 2 + 1, HOT-SWAPPABLE / HOT-PLUGGABLE REDUNDANCY FUNCTION
- N + 1 BALANCE LOAD SHARING DESIGN ON 5/12/3.3V CHANNEL
- REMOTE SENSING DESIGN
- ISOLATION: BUILT-IN IN THE POWER MODULE
- MEET IEC-1000-3-2 CLASS D ( ACTIVE PFC )
- DIMENSION: 82(H) X 127(W) X 276/300 (D) mm, 276mm -- W/O REAR DC FAN
- COOLING : THREE 40 mm DC FANS ( ONE IN EACH MODULE )
        ONE 80 mm DC FAN ( REAR SIDE )

----------------------
>>> SALES TERMS
----------------------

30-days warranty from item reception.
Return shipping at buyer's expense. NO exceptions.

Items paid using eChecks will only be sent once payment have cleared.
Typical wait time for this payment method is 8-10 business days.

Faster shipping is available. Please inquire before buying.
If you have any questions, feel free to ask.
Thank you for your interest!