PREMIUM WATER FILTER CARTRIDGE FOR FISHER & PAYKEL FRIDGES:
Replacement 842802 and all models of Fisher & Paykel fridges which utilise an external fridge filter located at the bottom grill

Brand New Aqua-Plus Fisher & Paykel fridge water filter suits all Fisher & Paykel refrigerator models that take an external filter. It replaces various filter cartridges, including the 842802, 81099 and 839041

About the EFF-6001A

This replacement fridge water filter is designed to improve the taste of your water. Kept in optimal working order, it yields bottled water quality on tap at just a fraction of the cost. Fridge filters are also designed to protect the internal workings of your refrigerator by controlling sediment, dirt and scale build up.

Features:

• Reduction filter works by chemical and mechanical means

• ​Fisher & Paykel Fridge Filter 81099, 842802 and 839041

• Delivers clean, clear water for great tasting up to 97%

• Effectively reduce cysts, chlorine taste and bad odour (99% of lead, 99% of Mercury, over 99% cysts, over 99% asbestos, 93%ofToxaphene, 77% Altrazine, 99% Lindane, 97% Chlorine and 99%, rust, sand, dirtand sediment.)

• Tested and used material according NSF International against NSF/ANSI Standards 42 for the reduction of chlorine taste and odour.

  In order to keep your filter working at its optimum, fridge manufacturers generally recommend replacement of fridge water filters every 6 months, or when the "change filter" light comes on or notice a decrease in flow of water..

The 842802 Fridge Filters Replace Part Numbers Below :

FISHER AND PAYKEL :  81099 842802 839041

Fridge Model Number :  RS36, RS90 RS9120

The cartridge can also replace the Whirlpool 4396701 water filter cartridge.

Fisher & Paykel Fridge Water Filter Spec:
Filter Type: Activated Carbon Block Filter Capacity: 200 gallons / 757 liters
Flow Rate: 0.5 gallon / minute
Operating Temperature: 33 - 100 Fahrenheit
Operating Pressure: 20-100 PSI
Micron Rating: 0.5


Installation and replacement procedure for the Fisher Paykel 842802 fridge water filter:

1.Grasp and firmly twist cartridge in an anticlockwise direction.
2.Pull the cartridge away from the filter head. (It is not unusual for a few drops of water to be present when the filter is removed)
3.Discard the old filter.
4. Remove protective cap on new filter.
5. Push the cartridge up towards filter head while rotating it in a clockwise direction.
6. Reset filter indicator icon on the display (this will remind you when your filter needs to be changed again)
7. Dispense around 5 litres of water to flush the cartridge, removing trapped air and harmless carbon fines.
8.Resetting the filter indicator:
9. Press and hold the "jug" and "right arrow" buttons for 4 seconds to reset the indicator

If you are an International Customer, please Contact us for accuate postage rate.