Welcome. Thanks for stopping in. Up for sale is one of my Univox U-1221 Amplifier restorations. This unit is SN-59337 manufactured in Japan in the early 1970s, most likely 1970-1971. This amp is fully restored and in excellent condition. Intended for guitar, this amp's tone circuitry and effects remain true to the original designer's intentions. This amp has lots of vintage sound and plenty of punch.

This amp is equipped with two (2) channels, each with Normal and Bright inputs, Volume, and Tone controls. Channel 1 incorporates, additionally, a Reverb circuit with Depth control, and a Tremolo circuit with Speed and Intensity controls. Both effects are full and deep. The Tremolo does not thump, and the Reverb is not harsh. The Tremolo circuit has been modified with a custom designed LDR/LED roach driven by a 12AX7 instead of the original 12AU7. This circuit reduces noise and produces great depth. The Reverb circuit incorporates a new Revisit Reverb Tank better matched to the circuit impedance. This amp achieves clean output up to 40 Watts RMS. This amp is equipped with an all-vintage pre-power tube line-up and includes a matched pair of vintage Toshiba 6L6GCs. This amp has low noise (a choke, similar to the units in the higher power Univox units, has been added to keep noise in check), has been burned in, extensively tested, and documented. This amp is provided with schematics including an As-Built and one documenting all mods and parts replaced. An impedance selector switch allows for choosing between 8 and 16 ohm outputs. There is a picture showing the amp with a matching custom 2x10 speaker cabinet (sold separately and not included). A new customized footswitch with LED indicators can remotely operate the Reverb and Tremolo circuits and is included. A cover by with a unique custom Univox Emblem sewn on the front is included and will keep this amp looking its best. A pocket in the cover is provided and holds the power cord.

The U-1221 is the big brother to the earlier U-320 (which uses 7591 output tubes instead of 6L6GCs). These models have similar post power supply design, however the U-1221 is higher wattage. The tube line-ups are similar with the exception of the phase inverter and output tubes. A picture of these two models together is posted to show the differences (for reference only, not the units for sale). The U-1221 model is on the bottom. As you can see, inputs and controls are identical, just different size, knobs, and color faceplates.

This amp includes a number of safety and protection upgrades including IEC power cord connection with grounding, AC line safety capacitor, varistor surge protection, HT fusing, an HT discharge resistor, and OT output protection resistors. The transformers are original. All power supply, electrolytics, and coupling capacitors, resistors beyond 10% of their original ratings, and all potentiometers have been replaced. An adjustable fixed bias circuit has been added. An internal low speed, low noise cooling fan assists the natural convection cooling to reduce internal temperatures (20F by my testing). This amp has new knobs, new black Tolex , a mix of original and new hardware, new handle, and new rubber feet. There are minor scratches, imperfections, and metal oxidation typical of an amp over 50 years old.

The return period for this unit is fourteen (14) days after confirmed delivery from UPS is received. During this period, you may return the unit for any reason. Due to the effort that was required for this restoration, it is important that SLA Restorations LLC understands why the unit is being returned, so SLA Restoration LLC simply asks that the buyer provide a detailed explanation as to why the unit is being returned. The unit must be returned undamaged, unabused, unaltered, fully operational, in the original packaging, and with all the original paperwork. Return shipping is paid by the buyer. A full refund (excluding return shipping) will be given only after verification of these terms have been complied with. SLA Restoration LLC will not be responsible for any damage during return shipping therefore it is highly recommended that insurance be purchased by the buyer. Failure to comply with these terms can result in up to a 25% restocking charge, at the sole discretion of SLA Restoration LLC.

The warranty period for this unit is thirty (30) days after confirmed delivery from UPS is received. This warranty is valid only to the original buyer. The warranty covers all parts, work, and modifications installed/performed on the unit by SLA Restoration LLC. This warranty does not cover failure of any original vintage parts. Return shipping for warranty service is paid by the buyer. The unit will be evaluated by SLA Restoration LLC upon return, and the buyer will be notified as to the cause of the failure prior to repair. SLA Restoration LLC will repair/replace the parts, work, and modifications performed originally by SLA Restoration LLC and return the unit to operating condition free of charge to the buyer and return the unit to the buyer. If the cause of the failure is determined to be the failure of a vintage part not covered by this warranty, the buyer will be responsible for the cost of parts and labor to return the unit to operational condition or can elect to have the unit returned without repair. During the warranty period, the unit must be returned to SLA Restoration LLC for repair. Attempts at repair by the buyer or by any other person will void this warranty. A detailed explanation of the problem(s) is required prior to the unit’s return. The unit must be returned to SLA Restoration LLC undamaged and unabused, unaltered, unmodified, in the original packaging, and with all the original paperwork. SLA Restoration LLC will not be responsible for any damage during return shipping therefore it is highly recommended that insurance be purchased by the buyer. SLA Restoration LLC will make every attempt to repair the unit, unfortunately, there may be vintage parts that cannot be replaced with modern alternatives. If for some reason a vintage part has failed that cannot be replaced, the unit will be returned to the buyer unrepaired. Return shipping to the Buyer after warranty service is paid by SLA Restoration LLC.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY LOSS OR DAMAGE ARISING DIRECTLY OR INDIRECTLY FROM THE USE OF THE PRODUCT OR FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. EXCEPT FOR THE FOREGOING AND THE LIMITED WARRANTIES DESCRIBED, SELLER MAKES NO EXPRESS WARRANTY WITH RESPECT TO ANY PRODUCTS SOLD to buyer AND SPECIFICALLY EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

No other warranties are expressed or implied.

Thanks for looking :)