eBay

Description:

Our oil drain is designed with a large funnel and a 18.5 -gallon steel tank that quickly collects motor oil, transmission fluid, and coolant from under lift-mounted vehicles without making a mess. It has both rigid casters and swivel casters for smooth transport. This drain pan is perfect for evacuating used fluid, including motor oil, transmission fluid, and coolant.

Features:

Oil Level Sight Window: For monitoring waste oil recovery,enabling easy determination of when
to discharge waste oil from the tank.

Large-size Oil Catch Pan: A large-size oil catch pan with a diameter of 41cm, providing a wide oil-catching area.

Height-adjustable Lifting Rod Mechanism: Features a height-adjustable lifting rod mechanism with a maximum height up to 1.5 meters.

Thickened Tank Construction: Large 70-liter capacity with 1.5mm thickened materials to prevent oil leakage and air leaks.

360° Swivel Casters: Equipped with 360° swivel casters for easy mobility. The casters have locking devices and strong load-bearing capacity.

Three Years Warranty: If you have any questions, please feel free to contact us, we are sure to provide you a satisfied solution within 24 hours. For damage caused by non-human factors, we promise to resend parts for free within three years.

Operation Instructions:

Installation:

Fix the lifting rod and oil pan funnel in place by rotating in the “clockwise” direction. After installation, ensure that the lifting pole is in a vertical position relative to the equipment. Adjust the lifting rod device by turning it counterclockwise to adjust the height of the lifting rod oil pan funnel. Turn it clockwise to tighten.

Waste oil recovery:
● Use a lifting device to raise the vehicle to a suitable height.
● Ensure a safe working environment and position the equipment under the vehicle engine with the oil pan funnel aligned with the engine’s drain hole.
● Unscrew the vehicle’s engine oil drain plug.
● The waste oil will be discharged into the storage tank through the oil pan funnel.

Waste oil discharge of oil storage tank:
● Close the oil discharge pipe valve.
● Close the oil tank inlet valve.
● Connect the air supply to the oil tank inlet valve.
● Open the oil tank inlet valve and pressurize it. Once it reaches a certain pressure, the check valve will automatically close. When the pressure inside the oil tank exceeds 1.0 bar, the safety valve will automatically release the pressure.
● After 5 seconds, slowly open the oil drain valve. Note: It must be slow.
● After discharging the oil, cut off the air supply.