Pneumatic Spring Gas Pressure Dampers Length 275-925mm 100N - 1000N Universal

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


OFFER!!! You get the eyelets for free!

The gas pressure springs are sent as shown in the technical drawing, the "eye holes" at the respective ends of the gas springs (see technical drawing). The Eye holes are removable.

Need the shorter or longer than the extended length of your chosen gas spring? Below you will find alternative advertisements and click on the details under the (Ø) diameter symbol.
Gas spring without end piece
  O Length (from ∼ to)Newton (from ∼ to)
6/1590 ∼ 375mm50 ∼ 400 N M6
8/18140 ∼ 700mm50 ∼ 800 N M6
10/22150 ∼ 860mm60 ∼ 1200 N M8
10/22235 ∼ 885mm100 ∼ 1000 N M8
Gas spring with eyelets
  O Length (from ∼ to)Newton ( from ∼ to)
8/18180 ∼ 750mm50 ∼ 800 N M6
10/22190 ∼ 950mm60 ∼ 1200 N M8
10/22275 ∼ 925mm100 ∼ 1000 N M8
10/22205 ∼ 965mmr  60 ∼ 1200 N M8
14/28330 ∼ 1125mm500 ∼ 2500 N M10

       Gas spring with ball joint

Gas spring with ball socket
  O Length (from ∼ to)Newton ( from ∼ to)
8/18190 ∼ 750mm50 ∼ 800 N M6
10/22200 ~ 960mm60 ∼ 1200 N M8
  O Length (from ∼ to)Newton ( from ∼ to)
8/18175 ∼ 735mm50 ∼ 800 N M6
10/22            295 ∼ 945mm        100 ∼ 1000 N M8 


Below you will find alternative connection accessories. (To shorten or lengthen the gas spring length.)

        eyeletsball socketball joint   clevisP.Ball joint  rod endP.ball headrenewal

The matching mounting plates can be found below.

                For eyelets           For ball socket


installation specification

    ● To ensure optimal performance of the gas spring, it must be installed with the piston rod down.
    ● The warning sign or serigraph should not be removed.
    ● When checking the gas springs, the piston must be pointing downwards.
    ● The piston rod should be protected from dust, paint and damage.
    ● The gas spring should not be mechanical, modified or damaged.
    ● Extension speed VS2: 0.1 - 0.3 (m/s)
    ● Gas spring operating temperature range: -30°C to 80°C.

Technical information
Exact data for the respective gas springs can be found in the technical drawing. 

    ● Overall length: 275 mm ∼ 925 mm length (from eye center to eye center) 
    ● Hub: 95mm ∼ 415mm length
    ● Power: 100 ∼ 1000Nm
    ● Cylinder: Ø22
    ● piston rod: dia 10
    ● Thread: M8
    ● Thread length: 10mm
    ● eye hole: diameter 8 mm
    ● End position cushioning: 40mm

guarantee

If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross negligence, product liability and in the event of breach of essential obligations that endanger the achievement of the purpose of the guarantee.

warranty processing;
In order to help you as quickly as possible when contacting your Ausmachine customer service, please keep the following information in mind ready;
- Original invoice (incl. Date of purchase, name and address of the dealer and the full type designation of the product)
- Serial number for gas spring (all Ausmachine gas springs are provided with a serial number)

warranty period;
Two years after the initial purchase of the Ausmachine product.

If guarantees are advertised, the details can be found in the guarantee conditions. If there are defects in the purchased item delivered or the mechanical product purchased, you are entitled to statutory warranty rights. Your statutory warranty claims are not restricted by a guarantee.
If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross n
Marke Ausmachine
Stil Universal Gasdruckfeder
Garantie 2 Jahre
Beschreibung des Paketinhalts 2 Stück Zubehör Auge Loch für je eine Gasdruckfeder
Besonderheiten Öse, Newton, Kraft, Länge, Zylinder
Herstellernummer 275-925-1022M8
Gehäusedurchmesser 22mm
Kolbenstangendurchmesser 10mm
Hub 95-415mm
Länge 275-925mm
Material Stahl
Anzahl der Bohrungen Zwei
Angebotspaket Ja
Ausschubkraft 100Nm 150Nm 200Nm 250N 300N 350 400N 550Nm ∼ 1000N
Markenkompatibilität2 Gasdruckdämpfer
Produktlinie Gasdruckdämpfer, Gasdruckfeder, Gasfeder
Modifizierter Artikel Nein
Gewicht 0,25-0,75kg
Gewindedurchmesser 8mm
OE Nummern Gasdruckdämpfer Gasdruckfeder Gasfeder
Set enthält Ösen Endstücke für Gasdruckfedern
Schlüsselweite 11/32
Anzahl der Einheiten 1
Endlagendämpfung 40mm
Maßeinheit Einheit
Einbauseite Beidseitig
Markenkompatibilität Kraft & Gesamtlänge & Durchmesser
Herstellungsland und -region Türkei