Gas Pressure Dampers Strut for Caravan Imbisswagen Commercial Trailers Tailgate

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


110N 120N 180N 360N 420N 700N 1100Nm 365mm 445mm 525mm

The gas springs come with eye holes at the respective ends of the gas springs (if in the technical shown in drawing) sent.

Need the shorter or longer than the extended length of your chosen gas spring? Below you will find alternative advertisements and click on the details under the (Ø) diameter symbol.
Gas spring without end piece
  O Length (from ∼ to)Newton (from ∼ to)
6/1590 ∼ 375mm50 ∼ 400 N M6
8/18140 ∼ 700mm50 ∼ 800 N M6
10/22150 ∼ 860mm60 ∼ 1200 N M8
10/22235 ∼ 885mm100 ∼ 1000 N M8
Gas spring with eyelets
  O Length (from ∼ to)Newton ( from ∼ to)
8/18180 ∼ 750mm50 ∼ 800 N M6
10/22190 ∼ 950mm60 ∼ 1200 N M8
10/22275 ∼ 925mm100 ∼ 1000 N M8
10/22205 ∼ 965mmr  60 ∼ 1200 N M8
14/28330 ∼ 1125mm500 ∼ 2500 N M10

       Gas spring with ball joint

Gas spring with ball socket
  O Length (from ∼ to)Newton ( from ∼ to)
8/18190 ∼ 750mm50 ∼ 800 N M6
10/22200 ~ 960mm60 ∼ 1200 N M8
  O Length (from ∼ to)Newton ( from ∼ to)
8/18175 ∼ 735mm50 ∼ 800 N M6
10/22            295 ∼ 945mm        100 ∼ 1000 N M8 


Below you will find alternative connection accessories. (To shorten or lengthen the gas spring length.)

        eyeletsball socketball joint   clevisP.Ball joint  rod endP.ball headrenewal

The matching mounting plates can be found below.

                For eyelets           For ball socket


installation specification

    ● To ensure optimal performance of the gas spring, it must be installed with the piston rod down.
    ● The warning sign or serigraph should not be removed.
    ● When checking the gas springs, the piston must be pointing downwards.
    ● The piston rod should be protected from dust, paint and damage.
    ● The gas spring should not be mechanical, modified or damaged.
    ● Extension speed VS2: 0.1 - 0.3 (m/s)
    ● Gas spring operating temperature range: -30°C to 80°C.

Technical information
Exact data for the respective gas springs can be found in the technical drawing. 

    ● Overall length: 135mm ∼ 900mm length
    ● Hub: 19mm ∼ 400mm length
    ● Power: 60 ∼1100 Newtons
    ● Cylinder: Ø 18 ∼ Ø 22 mm
    ● piston rod: Ø8 ∼ Ø 10 mm
    ● Thread: M6 ∼ M8
    ● Thread length: 10mm
    ● eye hole: diameter 8 mm
    ● End position cushioning: 40mm

guarantee

If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross negligence, product liability and in the event of breach of essential obligations that endanger the achievement of the purpose of the guarantee.

warranty processing;
In order to help you as quickly as possible when contacting your Ausmachine customer service, please keep the following information in mind ready;
- Original invoice (incl. Date of purchase, name and address of the dealer and the complete type designation of the device)
- Serial number for gas spring (all Ausmachine gas springs are provided with a serial number)

warranty period;
Two years after initial purchase of Ausmachine products.

If guarantees are advertised, the details can be found in the guarantee conditions. If there are defects in the purchased item delivered or the mechanical product purchased, you are entitled to statutory warranty rights. Your statutory warranty claims are not covered by a guaranteerestricts.
If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross n
If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross n
If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross n
Marke Ausmachine
Schlüsselweite 9/32 & 11/32
Verwendungszweck Wohnmobile, Camper, Reisemobile, Auto, Autohaube
Hub 19mm ∼ 400mm
Länge 135mm ∼ 900mm
Anzahl der Einheiten 1
Endlagendämpfung 40mm
Kolbenstangendurchmesser 8/10
Maßeinheit Einheit
Modifizierter Artikel Nein
Einbauseite Beidseitig
Ausschubkraft 60 ∼1100 Newton
Gewicht 0,20 ∼ 0,80
Markenkompatibilität Kraft & Gesamtlänge & Durchmesser
Grantie 2 Jahre
Herstellernummer 288-900
Herstellungsland und -region Türkei
Gehäusedurchmesser 18/22
Gewindedurchmesser 6mm / 8mm (Siehe technsiche Zeichnung)