Description

433Mhz Wireless RF 4 Channel Output Receiver Module and Transmitter EV1.ti8

[VIDEO1]

DESCRIPTION:

Specification:
Transmitting power: 11dbm 
Emission current: 10MA 
Rate of fire: maximum 10KB / S 
Operating Voltage: DC 3V-24V 
Encoding : EV1527 1527 Learning code 
Each module has a unique ID address code. 
All modules K1-K4 four key code is the same. 

Working Voltage : DC3.3~5V 
Quiescent Current : ≤5mA 
Output current : 10 mA 
Working Frequency: 433MHz 
Receive Sensitivity: -108dB 
Working Temperature : -25~75 
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking 
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. 

[How to match the transmitter and receiver] 
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). 
LED turns on: learning mode is active. Press any button of the remote control. 
LED indicator flashes three times: learning successfully completed. 
3. Test: after the above operation , the receiver board can be controlled by the remote control. 
More transmitters with different IDs can be learned and stored additionally, starting with step 2. 
A mixture of different modes is possible. 

Button usage (sets mode and starts pairing process): 
Press once: Inching mode (Momentary Mode) 
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) 
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)

Package Included: 1 * Receiver Module 
                  1 * Transmitter Module、
                  2 * Black rubber line

Note:
1.Under the influence of light and the display, the color difference may decrease slightly.
2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding

Preview:

























Thank you for your purchase

Problems?

You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions:

Shipping

● We will arrange shipping for you within 2-5 days after payment cleared except the holidays.

● We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost.

Payments

We accepts Paypal only If you have any questions about the payment,please contact us through eBay message.

Import Duties

In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.

Terms & Conditions

By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding.

All pictures are for illustration purpose only and Colours may vary slightly.

Our store obeys all eBay Rules and Policies.

Returns Policy

To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.

Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging.

All shipping and handing charges are non-refundable

Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items.

Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Specification:
Transmitting power: 11dbm 
Emission current: 10MA 
Rate of fire: maximum 10KB / S 
Operating Voltage: DC 3V-24V 
Encoding : EV1527 1527 Learning code 
Each module has a unique ID address code. 
All modules K1-K4 four key code is the same. 

Working Voltage : DC3.3~5V 
Quiescent Current : ≤5mA 
Output current : 10 mA 
Working Frequency: 433MHz 
Receive Sensitivity: -108dB 
Working Temperature : -25~75 
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking 
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. 

[How to match the transmitter and receiver] 
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). 
LED turns on: learning mode is active. Press any button of the remote control. 
LED indicator flashes three times: learning successfully completed. 
3. Test: after the above operation , the receiver board can be controlled by the remote control. 
More transmitters with different IDs can be learned and stored additionally, starting with step 2. 
A mixture of different modes is possible. 

Button usage (sets mode and starts pairing process): 
Press once: Inching mode (Momentary Mode) 
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) 
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)

Package Included: 1 * Receiver Module 
                  1 * Transmitter Module、
                  2 * Black rubber line

Note:
1.Under the influence of light and the display, the color difference may decrease slightly.
2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding