Part Number:
Frequency: 315Mhz
Package Include:
4 x TPMS(Tire Pressure Monitoring Sensor)
Application:
Fit For
2012 Chevrolet Colorado LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2011 Chevrolet Colorado LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2010 Chevrolet Colorado LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2009 Chevrolet Colorado LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2008 Chevrolet Colorado LS, LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas
2007 Chevrolet Colorado LS, LT, WT 2.9L L4 - Gas, 3.7L L5 - Gas
2012 GMC Canyon SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2011 GMC Canyon SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2010 GMC Canyon SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2009 GMC Canyon SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas, 5.3L V8 - Gas
2008 GMC Canyon SL, SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas
2007 GMC Canyon SL, SLE, SLT, WT 2.9L L4 - Gas, 3.7L L5 - Gas
2010 Hummer H3 Alpha, Base 3.7L L5 - Gas, 5.3L V8 - Flex
2009 Hummer H3 Alpha, Base, Championship Series, X 3.7L L5 - Gas, 5.3L V8 - Gas
2008 Hummer H3 Alpha, Base, X 3.7L L5 - Gas, 5.3L V8 - Gas
2007 Hummer H3 Base, X 3.7L L5 - Gas
2006 Hummer H3 Base 3.5L L5 - Gas
2010 Hummer H3T Alpha, Base 3.7L L5 - Gas, 5.3L V8 - Flex
2009 Hummer H3T Alpha, Base 3.7L L5 - Gas, 5.3L V8 - Gas
if you can't confirm 100% fit , Pls Send us your VIN or part number(s) .
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.