Tyvek® Slip Retardant Overshoe

10 PAIRS OF ANTI SLIP OVER SHOES

SIZE Medium (EU32-43 UK 2-9)

Tyvek®  

Description

  • Applications - Garments and accessories made of Tyvek® are used in the biotech, pharmaceutical, medical device manufacturing and electronics industries, as well as in other industrial applications
  • Spun bonded polyethene, non woven material
  • Shoe covers made from Tyvek® - white with antislip
  • Electrostatic protection according to EN 1149-1 - treated on both sides of the fabric
  • Elastic on the ankle to ensure a good fit and to prevent the shoe slipping off
  • Permeable to both air and water vapour yet repels water-based liquids and aerosols
  • Stitched in slip retardant sole to prevent slipping
  • Good balance between protection, durability and comfort
  • High value in use - limited life clothing

CAT III

PB[6]

EN 14126


Certifications 
  • Certified according to Regulation (EU) 2016/425 
  • Partial body chemical protective clothing, Category III, Type PB [6-B] 
  • EN 14126 (barrier to infective agents) 
  • Suitable for use in GMP class C/D (ISO Class 6-9) clean rooms 
NameDescription
Quantity2 polyethylene liners
Fabric/MaterialsTyvek® 500
DesignSlip-retardant boot cover
SeamBound
ColorWhite




Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

PropertyTest MethodTypical ResultEN
Abrasion Resistance 7EN 530 Method 2>100 cycles2/6 1
ColourN/AWhiteN/A
Flex Cracking Resistance 7EN ISO 7854 Method B>100000 cycles6/6 1
Puncture ResistanceEN 863>10 N2/6 1
Tensile Strength (MD)DIN EN ISO 13934-1>30 N1/6 1
Tensile Strength (XD)DIN EN ISO 13934-1>30 N1/6 1
Trapezoidal Tear Resistance (MD)EN ISO 9073-4>10 N1/6 1
Trapezoidal Tear Resistance (XD)EN ISO 9073-4>10 N1/6 1


  •  According to EN 14325
    •  
  •  According to EN 14126
    •  
  •  According to EN 1073-2
    •  
  •  According to EN 14116
    •  
  •   According to EN 11612
    •  
  •  Front Tyvek ® / Back
    •  
  •  Based on test according to ASTM D-572
    •  
  •  See Instructions for Use for further information, limitations and warnings
    •  
  •  Larger than
    •  
  •  Smaller than
    •  
  •  Not Applicable
    •  
  •  Standard Deviation

GARMENT PERFORMANCE

Information relating to the protective performance of a garment according to European standards where applicable. Includes important characteristics such as protection against radioactive contamination, seam strength and shelf life. Inward leakage and resistance to penetration by liquids, according to the relevant Type classification, are also detailed.

PropertyTest MethodTypical ResultEN
Seam StrengthEN ISO 13935-2>30 N1/6 1
Type PB 6: Partial Body ProtectionEN 13034PassN/A
  •  According to EN 14325
    •  
  •  According to EN 1073-2
    •  
  •   According to EN 11612
    •  
  •   According to EN 11611
    •  
  •  Front Tyvek ® / Back
    •  
  •  Based on test according to ASTM D-572
    •  
  •  See Instructions for Use for further information, limitations and warnings
    •  
  •  Based on the average of 10 suits, 3 activities, 3 probes
    •  
  •  Larger than
    •  
  •  Smaller than
    •  
  •  Not Applicable
    •  
  •  Based on lowest single value


PENETRATION AND REPELLENCY

A specific test method, EN ISO 6530, is used to measure the indexes of penetration, absorption and repellency of protective clothing material exposed to liquid chemicals. Results listed here reflect the penetration resistance and repellency of DuPont fabrics to 30% sulphuric acid and 10% sodium hydroxide.

PropertyTest MethodTypical ResultEN
Repellency to Liquids, Sodium Hydroxide (10%)EN ISO 6530>95 %3/3 1
Repellency to Liquids, Sulphuric Acid (30%)EN ISO 6530>95 %3/3 1
Resistance to Penetration by Liquids, Sodium Hydroxide (10%)EN ISO 6530<1 %3/3 1
Resistance to Penetration by Liquids, Sulphuric Acid (30%)EN ISO 6530<1 %3/3 1
  •  According to EN 14325
    •  
  •  Larger than
    •  
  •  Smaller than


BIOLOGICAL BARRIER

Detailed information on the protective performance (resistance to penetration) of DuPont clothing when exposed to biologically contaminated aerosols, liquids and dusts as well as blood, body fluids and blood-borne pathogens. Sorted by relevant European standard.

PropertyTest MethodTypical ResultEN
Resistance to Penetration by Biologically Contaminated AerosolsISO/DIS 22611Pass1/3 2
Resistance to Penetration by Blood and Body Fluids using Synthetic BloodISO 166033,5 kPa3/6 2
Resistance to Penetration by Blood-borne Pathogens using Bacteriophage Phi-X174ISO 16604 Procedure CNo classificationNo classification 2
Resistance to Penetration by Contaminated LiquidsEN ISO 22610≤ 15 min1/6 2
Resistance to Penetration by Contaminated Solid ParticlesISO 22612Pass1/3 2
  •  According to EN 14126
    •  
  •  Larger than
    •  
  •  Smaller than



For further enquiries please contact us. 

Our details can be found in the ‘Business Seller Information’ below.

Visit our Ebay shop for further availability on a range of similar products.

Discounted rates are available on items bought in larger quantities.

Thank you for your interest in the products & services we offer.