eBay

Product Description

110 Volt Pad Heater Engine Heater Oil Pan Tank Car Truck Start Pre Heater 175W

The silicon rubber heater is mainly composed of nickel chromium alloy electric heating wire and high temperature silicon rubber insulation layer. Silicone rubber high temperature insulation layer is made of silicone rubber and glass fiber cloth composite and into a thin sheet (1.5mm), silicone rubber heater has a good flexibility.

Features:
＞Fast heating, uniform temperature, high thermal efficiency, high strength, easy to use, safe life for up to four years, not easy to aging.
＞The silicon rubber heater can be used in the wet, non explosive gas environment, industrial equipment, pipelines, tank barrels with heat insulation (oil heater).

＞Can be directly tied to the surface of heated objects.

＞Wire and Pad heater all made by High-temperature resisting silicone. Ensure long-term use. Oil and acid resistant, Waterproof.
＞Built-in highest quality thermal overload protection switch for Power saving. Additional safety. Fast heat rises.
＞Keeps engine oil warm. Prevent cold start damage, reduce engine wear.
＞3M high temp adhesive on reverse side, easy to install.
＞This heater is significantly more efficient and better than a conventional tank heater.
＞Can be used as the auxiliary heating of the refrigeration and air conditioning compressor, motor and other equipment.

＞Can be used as medical devices (such as blood analyzer, test tube heater, medical care, slimming belt corset heat compensation etc.).

Specification:
Material: Alloy wire,Silicone rubber
Color: Orange
Product size:
Heater size: length:13cm width:9cm
Wire length: 200cm
Insulation material the highest resistance temperature: 300 degrees
Power error: 8%
Insulation resistance:≥5 MΩ
Compressive strength: 1500v/5s
Resistance voltage: 6KV
Power:110v 175w

INSTALLATION INSTRUCTIONS FOR SILICONE HOT PAD HEATER:

1. CLEAN AND SAND RESERVOIR TO BARE METAL. REMOVE ALL DIRT, GREASE, OIL AND

OTHER CONTAMINANTS USING A DEGREASING SOLVENT. DO NOT USE GASOLINE OR

ACETONE.

2. IF HEATER IS TO BE INSTALLED ON A VEHICLE, TRY TO RUN THE ENGINE TO PRE-WARM

THE OIL PAN.

3. PEEL OFF BACKING AND APPLY PAD TO RESERVOIR MAKING SURE THAT THERE ARE NO

AIR POCKETS OR CREASES IN THE PAD. USE A ROLLER OR SPREADER TO REMOVE THEM.

4. SEAL THE EDGES OF THE HEATER WITH HIGH TEMPERATURE SILICONE TO INSURE

PROPER PROTECTION TO THE EDGE OF THE HEATER.

5. SECURE THE CORD UP AND OUT OF THE WAY OF ANY OBSTRUCTIONS, MAKING SURE

THAT IT DOES NOT HANG DOWN FROM THE PAN OR TOUCH ANY HOT OR MOVING

NOTE:
1. Do not cut pad.
2. Do not use on batteries
3. This heater can only be used on a metal pan or tank with a smooth float surface.. It should never be installed on a plastic or poly container.

Package Included:
1 PC Heater Pad (not with plug)

Payment
Shipping
Returns
Contact Us

We accept payment by PayPal only !

Payment should be completed within 7 days after buyer places the order,or else an unpaid case will be opened in order to cancel the transaction.

If you can not pay in time, please contact us.

eCHECK from PayPal will only be processed once the payment clears.

All of the items will be shipped to buyer's EBAY address,please confirm your address on Ebay before you buy.

Your order will be usually shipped out the same or next business days once the payment is made and cleared.

All items will be checked before packing. All items are new and of high quality.
Item will be shipped within 1-3 business days upon receipt of payment, excluding weekends and public holidays.
If to USA,we will ship your order by USPS,it will take about 6-8 working days to you,and you can track it on line.

If to other country,we will ship your order by China Post or Singapore Registered Air Mail,it will take about

15-21 working days to you,you aslo can track it on line.

Delivery time is about 14-28 business days and it may take up to 8 weeks to some European countries and

South American countries due to strict custom inspection. We ship worldwide.

Shipping fee include packing, warehouse, distribution, order handling and processing costs.
We offer combined shipping discount on Shipping & Handling.

Please note that some countries will have custom duty or tax for certain items.

It is the buyer's responsibility to pay all endued custom duty or tax.

We are not responsible for any custom duty or tax since our price do not include this charge.

30-day Warranty with Exchange for defective, malfunctioned, incorrect or partsmissing items.

Please notify us and return the item with all parts and accessories packed and marked "FOR EXCHANGE" within 14 days of receipt.

If defective, malfunctioned or parts-missing items are no longer available, a refund may be issued.
All returning postage costs will be the responsibility of the buyers under all circumstances.

If you encounter any problems about anything, please feel free to contact us and we will do our best to assist you solve the issue. If you are not satisfied in anyway, please feel free to let us know and give us a second chance to correct it before you decide to leave any neutral or negative feedback.

Please contact us through eBay link if you have any questions. We will reply you within 24- 48 hours. Please check you spam mail if no response for 48 hours.

Payment