Sadolin Classic Wood Protection

Sadolin

Sadolin Classic Wood Protection Is a truly versatile Woodstain that can be used on a wide variety of Interior and exterior wood surfaces.

It Absorbs deeply into the timber to provide exceptional protection against the weather. It is particularly effective on large areas of timber such as cladding, fascias, decking and rough-sawn timber.

Sadolin Classic is also ideal as a base stain on new joinery, which is to be subsequently treated with Sadolin Extra.

Specification

Coverage

Up to 15 sq m per Litre on smooth softwood and hardwood

Up to 8m² per litre on sawn softwood.
Coats 2
Drying Time

Touch Dry: 4-6 hours

Re-coat: 16-24 hours
Application Brush 

Preparation:

For general timber, ensure the surface to be painted is clean, dry, and dirt free to ensure adhesion. The moisture content shoudl not exceed 18%.

Degrease any exposed bare timber by wiping with a clean, lint free cloth dampened with methylated spirits, frequently changing the face of the cloth.

Abrade sound timber surfaces in the direction of the grain using medium/medium fine grade (P180/P240) pads/abrasive paper (nothing metallic), taking care not to damage or scratch across surfaces. 

Use Sadolin Woodfillers to make good any minor surface defects. General or all purpose fillers are not suitable. We recommend the use of non-ferrous screws, nails and fixings. Exposed ferrous items may corrode and break the coating film over time if not suitably primed/treated prior to decorating on timber previously treated with creosote or similar water repellent treatments, ensure that they are well weathered and do not retain any smell or ‘oily’ surface. This can be tested by splashing with water, if the water is readily absorbed, then treatment with Sadolin Classic should be satisfactory.

For full preparation information for all wood types, please see the technicial data sheet in the next tab

Application:

Stir well before and during use. Use a good quality synthetic bristle brush. Apply in a full flowing coat, maintaining a wet edge. Ensure all surfaces, tops and bottoms of doors, and undersides of cills are coated. Ensure end grains and sawn timbers are coated to saturation, after 5-10 minutes redistribute the coating brushing in the direction of the grain. Avoid overspreading. 

Colour Range

There are 13 standard colours in the Sadolin Classic range, which are ready mixed, all the other 50 colours are tinted on our in-house Crown mixing system. 

Once colours have been tinted, they cannot be cancelled or returned as they have been mixed to your specific requirements.

Heritage Oak

Is a new standard colour and is only available in 1L and 2.5L tin sizes. 

Sample pots- are only available in the tinted colour range.