What???600USD, just to get rid of those little dents? Is this a joke? (When 4S shop maintenance the indicated price appears before your eyes)
NO! NO! NO!You only have to pay little Money and you will remove all dents (including large and small dents). You will also experience the DIY Dent Removal fun. Let me help you!
I will help you repair various types of dent on the motorcycle body, refrigerator and washing machine. No dismantling required! No sheet metal tools required!! There is no need to spray paint!!!
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
 |  |  |  |
2023 New style Dent Puller Adjustable height; Removable Foot for different size dent; Anti-rust material | Dent Puller Bridge Easy to Operate; | Reflector Board Help to find the dent fastly | 2 in 1 Slide Hammer Save time and energy |
 |  |  |  |
| Rubber Dent Removal Hammer | 100W Glue Gun& glue sticks | PDR Crowbar/Rods | Dent Removal Accessary |
See, How it works 👇
Package include:
10 x PDR Rods
10 x PDR Rods
1X Dent Detection Board
1 x 2 in 1 Slide Hammer
1 x Dent Lifter
1 x Dent Bridge Puller
1 x Rubber Hammer
1 x Hot glue Gun
1 x Tap Down w/9 Heads
10 x Glue Sticks
37 x Puller Tabs
1 x 2 in 1 Slide Hammer
1 x Dent Lifter
1 x Dent Bridge Puller
1 x Rubber Hammer
1 x Hot glue Gun
1 x Tap Down w/9 Heads
10 x Glue Sticks
37 x Puller Tabs
4X Nylon pen
1 x Empty Bottle for Filling Alcohol
1 x Plastic Shovel
1 x PDR Bag
1 x Empty Bottle for Filling Alcohol
1 x Plastic Shovel
1 x PDR Bag
