- CH9121 compatible with IEEE 802.3
- SP232EEN half-duplex transiever IC
- Support 10/100Mbps Ethernet
- Support MDI/MDIX
- Support DHCP and DNS
- Power supply DC5.0V
- Support Keepalive mechanism
- Support Baud rate 300~921600 bps
- Working Mode TCP Client/Server, UDP Client/Server
- 2xSockets connection
- Configuration Tool available for downloading (in English)
- 120~200mA Working current
- RS-232 Terminal, RJ-45 with LED, Power Supply LED
- AT commands and GUI configuration
- 60(L))x34(W)x17(H)mm
- ca 25g Net Weight
|
- USB 2.0 compliant interface, supports 12 Mbps datarate
- Supports USB suspend, resume and remot wakeup operations
- UART data rates up to 12 Mbps
- UART support 128 byte TX FIFO
- UART support 384 byte RX FIFO
- 7,8,9 data bits, 1 or 2 stop bits
- Automatic Software (Xon/Xoff) Flow Control
- Half-Duplex mode
- Selectable GPIO or Modem I/O
- Internal 48MHZ clock
|
- RS232 9DB Female connector/RS485 DB9 Male connector + PCB interface Board
- Asynchronous, half-duplex, differential transmission
- Supporting Point - Point and Point-Mulitpoints communication
- 300~115200bps transmission rate
- 1200m (RS-485) Transmission distance
- Pin Block for RS-485 (32mmx31mm)
- 63mm x 33mm x 17mm
- -20° ~ 70° working temperature
|
- RS485 Terminal T+(A), T-(B)
- CAN Terminal CAN_G/L/H
- max. 1M bps CAN communication
- 4 transmission modes
- Supporting ModBus RTU
- DC8V~28V power supply
- Indicator for Power, CAN, Serial
- Dimension 74mmx102mmx34mm
- 18mA@DC12V standby
- Working temperature -30°~+80°
- GUI and AT configuration
|
