Type:
Type B: receiving power, switch type
Received power supply: 6V maximum supply current 1A
Output supply lamp sets: 2 sets of independent LED lamp sets (1 and 2)
Scene A: when the power is first energized, 1 and 2 are not bright
Scene B: click on remote controller 1 to light up; 2 not bright
Scene C: click the remote controller 1 not on, 2 on
Scene D: click the remote controller again, 1 on, 2 on
Scene 5 press again: 1 and 2 are closed, then press and enter scene B in sequence

Type C: receiving power supply, functional type
Power supply mode: receiving power supply: 6V maximum supply current 1A
Output supply light sets: 4 sets light 1234. 1 and 2 are in parallel, 3 and 4 are in parallel. It can be understood as 2 sets of output lights, making 4 interfaces.
Scene A: at the beginning of the electrification, 1 and 2 is not bright, 3 and 4 is not bright
Scene B: click on the remote controller, 1 and 2 not bright, 3 and 4 not bright
Scene C: click the remote controller again, 1 and 2 is not bright, 3 and 4 bright
Scene D: click the remote controller again, 1 and 2 bright, 3 and 4 bright
Scene E: press the remote controller again, 1 and 2, 3 and 4 enter the breathing flash state
Scene F: click the remote controller again, 1 and 2, 3 and 4 enter the burst and flashing state
Scene G: press again, 1 and 2, 3 and 4 in a close state, and then press enter scene B in sequence

Type D: independent power supply function
Power supply mode: independent power supply: 5-12.4V maximum supply current 1A
Output supply light sets: 4 sets light 1234. 1 and 2 are in parallel, 3 and 4 are in parallel. It can be understood as 2 sets of output lights, making 4 interfaces.
Scene A: at the beginning of the power supply, 1 and 2 is not bright, and 3 and 4 is not bright
Scene B: click on the remote controller 1 and 2 bright, 3 and 4 not bright
Scene C: click the remote controller 1 and 2 is not bright, 3 and 4 is bright
Scene D: click the remote controller 1 and 2 bright, 3 and 4 bright
Scene E: press the remote controller again, 1 and 2, 3 and 4 enter the breathing flash state
Scene F: click the remote controller again, 1 and 2, 3 and 4 enter the burst and flashing state
Scene G: press again 1 and 2, 3 and 4 again to close the state, and then enter scene B in sequence

Type E: independent power, supply switch
Power supply mode: independent power supply: 5-12.4V maximum supply current 1A
Output supply light sets: 4 sets light 1234. 1 and 2 are in parallel, 3 and 4 are in parallel. It can be understood as 2 sets of output lights, making 4 interfaces.
Scene A: at the beginning of the power supply, 1 and 2 is not bright, and 3 and 4 is not bright
Scene B: click on the remote controller 1 and 2 bright, 3 and 4 not bright
Scene C: click the remote controller 1 and 2 is not bright, 3 and 4 is bright
Scene D: click the remote controller 1 and 2 bright, 3 and 4 bright
Scene E: press again 1 and 2, 3 and 4 in close state, and then enter scene B in sequence

Specification:
Suitable for: Traxxas Hsp Redcat Rc4wd Tamiya Axial scx10 D90 Hpi RC car spot lamp

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
1 X RC LED Lamp Control Panel