Automatic Dental Handpiece Oiler Time Setting Scale Display Air Tubine Maintenance Lubricant Device Clinic Equipment Dental Oil Lubricating Machine 3 Handpiece Dental Lubricating Machine Handpiece Oil Machine
Specifications:
Supply voltage: 220V 110V
Rated power: 40W
Air source pressure: 4kg/cm² - 8kg/cm²
Working pressure: 2.5kg/cm²
Oil tank capacity: 350ML
Gas consumption: 60L/min
Net weight: 7kg
Overall dimension: 28.2*300*370cm
Rated power: 40W
Air source pressure: 4kg/cm² - 8kg/cm²
Working pressure: 2.5kg/cm²
Oil tank capacity: 350ML
Gas consumption: 60L/min
Net weight: 7kg
Overall dimension: 28.2*300*370cm
Functions:
1. Ensure the cleaning and refuelling of oral handpiece.
2.Can clean and refuel three oral handpieces at the same time.
3.Rotating gears can effectively clean and oil the handpiece from different angles.
4. After finishing the cleaning and oiling steps, press the "air button" to remove the excess residual oil inside the handpiece.
5. You can choose short mode, long mode and ultra-long mode to refuel according to different mobile phones.
6. The oil mist filter can prevent the spread of oil mist to a minimum.
7. Small size and large capacity saves storage space for dental clinics and hospitals.
1. Ensure the cleaning and refuelling of oral handpiece.
2.Can clean and refuel three oral handpieces at the same time.
3.Rotating gears can effectively clean and oil the handpiece from different angles.
4. After finishing the cleaning and oiling steps, press the "air button" to remove the excess residual oil inside the handpiece.
5. You can choose short mode, long mode and ultra-long mode to refuel according to different mobile phones.
6. The oil mist filter can prevent the spread of oil mist to a minimum.
7. Small size and large capacity saves storage space for dental clinics and hospitals.
Precautions:
1)It is prohibited to install, use and refill the product with lubricant in the space where there is danger of explosion and near the source of fire.
2) Do not install or use this equipment in direct sunlight or at temperatures exceeding 40 degrees Celsius (104 degrees Fahrenheit).
3) Do not use this equipment for any purpose not covered in this book, except for cleaning and maintenance oiling. Ventilate the equipment regularly and immediately if there is an odour inside the machine.
1)It is prohibited to install, use and refill the product with lubricant in the space where there is danger of explosion and near the source of fire.
2) Do not install or use this equipment in direct sunlight or at temperatures exceeding 40 degrees Celsius (104 degrees Fahrenheit).
3) Do not use this equipment for any purpose not covered in this book, except for cleaning and maintenance oiling. Ventilate the equipment regularly and immediately if there is an odour inside the machine.
Warnings and Precautions:
1) Do not touch the power cord with wet hands to avoid electric shock.
2)Do not spill water on the machine to avoid fire and electric shock caused by short circuit.
3)Do not disassemble or modify the machine. Please contact your dealer for maintenance service.
4)If the machine emits smoke or the smell of burning resin, switch off and unplug the machine immediately and contact your dealer.
5) Do not drop the machine from a height, place it on a level surface.
1) Do not touch the power cord with wet hands to avoid electric shock.
2)Do not spill water on the machine to avoid fire and electric shock caused by short circuit.
3)Do not disassemble or modify the machine. Please contact your dealer for maintenance service.
4)If the machine emits smoke or the smell of burning resin, switch off and unplug the machine immediately and contact your dealer.
5) Do not drop the machine from a height, place it on a level surface.
Safety Precautions:
1) Handsets need to be sterilised at high temperature after completing cleaning and oiling in the oil filler.
2) Do not place the dispenser in direct sunlight. It should be placed in an environment with a temperature of 10 to 40 degrees Celsius (50 to 104 degrees Fahrenheit) and a humidity of 25 to 70% RH.
3) The product should be installed with a 5cm clearance around the machine.
4) Air pressure is placed at 0.35～0.60Mpa (3.5～6.0kgf/cm2)(50～80psi)
5) Do not remove the filler cap while the machine is running, wait until the machine has come to a complete stop before opening it.
6) Be sure to perform the refuelling operation with the machine switched on.
7) If you need to remove the filler cap when the machine is not running normally (e.g., when opening the door cover), wait five seconds before removing the cap.
1) Handsets need to be sterilised at high temperature after completing cleaning and oiling in the oil filler.
2) Do not place the dispenser in direct sunlight. It should be placed in an environment with a temperature of 10 to 40 degrees Celsius (50 to 104 degrees Fahrenheit) and a humidity of 25 to 70% RH.
3) The product should be installed with a 5cm clearance around the machine.
4) Air pressure is placed at 0.35～0.60Mpa (3.5～6.0kgf/cm2)(50～80psi)
5) Do not remove the filler cap while the machine is running, wait until the machine has come to a complete stop before opening it.
6) Be sure to perform the refuelling operation with the machine switched on.
7) If you need to remove the filler cap when the machine is not running normally (e.g., when opening the door cover), wait five seconds before removing the cap.
Package includes:
1 x Dental Handpiece Cleaning Lubrication Machine
1 x oil
1 x Dental Handpiece Cleaning Lubrication Machine
1 x oil
Note:
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
