|
MP-3000E2 Electromagnetic Vibration Table Vertical Vibration Tester 1-100Hz Load Weight 30kg
Description: MP-3000 series power frequency, sweep frequency vibration testing machine is a kind of instrument to test the vibration resistance of electronic whole machine and all kinds of products. This machine adopts advanced microcomputer control circuit. The man-machine interface can set multi-section vibration parameters, and the power loss will not be lost. At the same time, it can also monitor the current number of vibration segments. When the machine is shut down or the power is suddenly cut off, the machine will automatically reset and the microcomputer will start up soft, and so on. This machine adopts intelligent digital circuit and professional PLC industrial control module, making the vibration testing machine more stable and reliable.
Specifications: Working power supply voltage: AC110V/220V±10%/ 50～60Hz Vibration frequency: 1～400Hz (arbitrary setting) Rated maximum power: 1.2kw Rated test load weight: 30kg Working table size: 390×360mm Direction of vibration: vertical / (Y) Operating environment: 0～40 ℃ 20 different vibration parameters can be set. The test time of each section can be set arbitrarily, up to 999 minutes (i.e.,16 hours), and the number of cycles is 0 to 200 times (standard type). No-load maximum displacement (amplitude) P-P / 3mm; (feature: adjustable amplitude of fixed frequency or sweep vibration mode, amplitude and frequency adjusted independently, without affecting each other). Note: Large amplitude frequency range is 20～70Hz. [maximum resonance center frequency FO: 55～58Hz]. When sweeping the vibration mode, the amplitude changes due to the change of frequency and weight, and the higher the frequency, the smaller the amplitude. No-load amplitude annot be greater than ± 1.5mm. Maximum acceleration: 30g.
Matters need attention Do not operate in flammable gas environment Do not use instruments where flammable and explosive materials are present. The use of any electrical instrument in such an environment is likely to cause safety damage. Protective earth wire Make sure the ground wire is in good contact before turning on, otherwise it will cause potential electrical damage. ※It is strictly forbidden to use the zero line in the AC circuit as the protective ground wire. Power Supply Voltage Before turning on the power supply, make sure that the voltage of the power supply is consistent with the rated voltage of the machine. Fuse Please use the specified standard fuse (110V / 6A)。 Before replacing the fuse, be sure to turn off the power supply. It is strictly forbidden to use apparatus for short fuse socket. Do not open the shell of the instrument on your own The inside of the instrument is high pressure. Do not remove the shell of the instrument and remove any parts of the modified instrument without special permission. Otherwise, we shall not be responsible for all the consequences.
What's in Package: 1x MP-3000E2 Vertical Vibration Tester (1~100Hz )
|
