A single UTP cable provides power and enables data transfer,reducing installation time and associated costs.
Ideal for IP based CCTV cameras, IP VoIP Phones, Wireless Access points and any other PoE compatible device.
It can be connected to your existing network via the built in fifth port and is Plug and Play, via its built in advanced auto sensing features.
FEATURES
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-8:250Metres ultra-long transmission)
Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices;
Auto MDI/MDIX crossover for all ports
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Just Plug and Play
SPECIFICATIONS
Interface | 8*10/100M POE ports (Data /Power) 2*10/100M uplink RJ45 ports (Data) | |
Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging | |
Standards | IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control | |
Mode | Normal switch mode/Extend mode | |
Data Transfer Rate | Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex) | |
Performance | Store & Forwarding | Yes |
Switching Capacity | 2G | |
MAC Address Table Size | 2K | |
Jumbo Frame | 2048 byte | |
Environmental | Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ | |
Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing | ||
Power Input POE Standards | Single port maximum power 30W, whole switch maximum power 120W Supporting Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- | |
AC 110~240V 50/60HZ | ||
Cabling type | 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) | |
Physical dimensions | 190mm*140mm*43mm(W x D x H) |