Product Name

SpeedyBee F405 WING FC board

MCU

STM32F405,168MHz,1MB Flash

IMU(Gyro&Accelerometer)

ICM-42688-P

Barometer

SPL006-001

OSD Chip

AT7456E

Blackbox

MicroSD Card Slot

UART

6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))

I2C

1x Used for magnetometer, digital airspeed sensor

ADC

4x (VBAT, Current, RSSI, Analog AirSpeed)

PWM

12x (11+1“LED”pad)

ELRS/CRSF receiver

Supported,connected to UART1

SBUS

Built in inverter for SBUS input (UART2-RX)

LED

3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB

RSSI

Supported,Named as RS .

Supported FC Firmware

INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING

Product Name

SpeedyBee F405 WING PDB board

Input voltage range

7~36V (2~6S LiPo)

Battery Voltage Sensor

Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)

Battery Current Sensor

90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)

TVS Protective diode

Yes

FC BEC output

Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip

VTX BEC output

Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.

Servo BEC output

Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.

Product Name

SpeedyBee F405 WING Wireless board

Wireless Configuration (long press BOOT button for 6 seconds to switch modes)

BLE mode, connect to Speedybee APP

Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.

Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner

LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes)

4x WS2812 LED strip connectors, adjustable colors and flashing modes

4x WS2812 LED strip connectors, adjustable colors and flashing modes

On-board battery level indicator

4x RGB indicator LED for battery level display by number of lights