Description
UGV01-X3 Intelligent Track Tank Robot Chassis with Horizon Sunrise X3 Pi Support for Bus Servo/PWM Output/SD Card Expansion
Description:
- The UGV01 series is a tracked mobile robot chassis, which features superb off-road crossing ability and anti-vibration performance, open source all code for secondary development. It supports multiple host computers (for Raspberry Pi, for Jetson Nano, etc), the host computer can communicate with the ESP32 slave computer through the serial port. The motor with encoder can obtain the speed feedback for closed-loop speed control. Built in 3S UPS power supply module, supports 3 x 18650 Li batteries (in series), which provides uninterruptible power for the robot and supports charging and power output at the same time. Built in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, for driving serial bus servos, outputting PWM signal, expanding TF card slot, etc.
- The UGV01 adopts multiple independent Suspension Systems which greatly reduce the impact of complex terrains, can easily meet the needs of heavy loads, shock absorption, and off-road. Also, it comes with 2 x 1020 European standard profile rails, provides more possibilities for secondary development.
Features:
- Tracked chassis development platform, superb crossing ability
- Superb anti-vibration performance, 4 x independent suspensions on each side
- UGV01-X3 unique function: excellent computing power/LiDAR/Altitude and night vision infrared camera
- For Horizon Sunrise X3 Pi is installed inside with 5 TOPS inference + 4-core ARM A53 processing capability
- DTOF LD10 LiDAR (measuring range: 0.02 - 12m, scanning angle: 360 degree)
- Night vision infrared camera (infrared cutoff filter can be turned on when the external light is strong, and infrared cutoff filter can be turned off when the external light is weak for active night vision)
- Optimized climbing capability, when climbing with heavy load, the suspensions will shrink and the rear wheel will provide extra support
- 3S lithium battery UPS power supply module: 3 x 18650 in series as the power for the robot, can output 5V and 3.3V for external devices. Onboard INA219 chip for detecting voltage/current information and so on. Supports charging and power output at the same time, allowing uninterrupted development
- Multi-functional robot driver board: Based on ESP32, not only open source the entire code of the UGV01, but also the demos of each module of this driver board, which is convenient for secondary development. Expanding multi functions for driving the DC motor, serial bus servo, OLED screen interface, TF card slot. Onboard 9-axis IMU, WIFI and bluetooth module. Can be used independently even without the host-computer.
Specification:
- Dimensions: 231 x 197 x 151mm
- Suspension systems: 4 x 2 (independent)
- Chassis height: 26mm
- Rail Center distance: 170mm
- Track width: 44mm
- Running speed: 0.25 ~ 1m/s
- Track level grounding length (non-load): 115mm
- Suspension material: 1.5mm (thickness) stainless steel
- Track climbing grounding length (with large load): 170mm
- Body material: 2mm (thickness) 5052 Aluminum Alloy
- Net weight: 1.9kg
- Vertical obstacle ability: 40mm
- Driving payload: 6.2kg
- Climbing ability: 36°
- Battery support: 18650 Lithium battery x 3
- Minimum turning radius: 0m (In-situ Rotation)
- Charging time: 1.5h
- Battery life: 1h (full power continuous output)
- Motor power: 5.2W x 2
- Remote control function: WIFI AP/STA
- Motor encoder: basic pulse 11PPR
- Communication interface: UART /serial bus servo interface / IIC
Package Included:
- 1 x Track Robot Tank Set
Description:
- The UGV01 series is a tracked mobile robot chassis, which features superb off-road crossing ability and anti-vibration performance, open source all code for secondary development. It supports multiple host computers (for Raspberry Pi, for Jetson Nano, etc), the host computer can communicate with the ESP32 slave computer through the serial port. The motor with encoder can obtain the speed feedback for closed-loop speed control. Built in 3S UPS power supply module, supports 3 x 18650 Li batteries (in series), which provides uninterruptible power for the robot and supports charging and power output at the same time. Built in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, for driving serial bus servos, outputting PWM signal, expanding TF card slot, etc.
- The UGV01 adopts multiple independent Suspension Systems which greatly reduce the impact of complex terrains, can easily meet the needs of heavy loads, shock absorption, and off-road. Also, it comes with 2 x 1020 European standard profile rails, provides more possibilities for secondary development.
Features:
- Tracked chassis development platform, superb crossing ability
- Superb anti-vibration performance, 4 x independent suspensions on each side
- UGV01-X3 unique function: excellent computing power/LiDAR/Altitude and night vision infrared camera
- For Horizon Sunrise X3 Pi is installed inside with 5 TOPS inference + 4-core ARM A53 processing capability
- DTOF LD10 LiDAR (measuring range: 0.02 - 12m, scanning angle: 360 degree)
- Night vision infrared camera (infrared cutoff filter can be turned on when the external light is strong, and infrared cutoff filter can be turned off when the external light is weak for active night vision)
- Optimized climbing capability, when climbing with heavy load, the suspensions will shrink and the rear wheel will provide extra support
- 3S lithium battery UPS power supply module: 3 x 18650 in series as the power for the robot, can output 5V and 3.3V for external devices. Onboard INA219 chip for detecting voltage/current information and so on. Supports charging and power output at the same time, allowing uninterrupted development
- Multi-functional robot driver board: Based on ESP32, not only open source the entire code of the UGV01, but also the demos of each module of this driver board, which is convenient for secondary development. Expanding multi functions for driving the DC motor, serial bus servo, OLED screen interface, TF card slot. Onboard 9-axis IMU, WIFI and bluetooth module. Can be used independently even without the host-computer.
Specification:
- Dimensions: 231 x 197 x 151mm
- Suspension systems: 4 x 2 (independent)
- Chassis height: 26mm
- Rail Center distance: 170mm
- Track width: 44mm
- Running speed: 0.25 ~ 1m/s
- Track level grounding length (non-load): 115mm
- Suspension material: 1.5mm (thickness) stainless steel
- Track climbing grounding length (with large load): 170mm
- Body material: 2mm (thickness) 5052 Aluminum Alloy
- Net weight: 1.9kg
- Vertical obstacle ability: 40mm
- Driving payload: 6.2kg
- Climbing ability: 36°
- Battery support: 18650 Lithium battery x 3
- Minimum turning radius: 0m (In-situ Rotation)
- Charging time: 1.5h
- Battery life: 1h (full power continuous output)
- Motor power: 5.2W x 2
- Remote control function: WIFI AP/STA
- Motor encoder: basic pulse 11PPR
- Communication interface: UART /serial bus servo interface / IIC
Package Included:
- 1 x Track Robot Tank Set
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Dec 13, 2023 at 04:00:38 PST, seller added the following information: