Made by: ACME MIAMI

SID Part number: 390631

Aluminum Condenser  Fan Blade 
9”  Diameter 
Rotation is Counter Clockwise "CW" 
5 Blades 
Made for Unit Bearing Motors with 1/4” x 20 Threaded Shafts, can also be used on other motors.

This is a condenser fan blade is made for the 9 Watt to 16 Watt condenser fan motors that have a CCW rotation looking at the back or lead end of the motor. 

If you look at the front of the motor the rotation is CCW.

It draws air over the condenser and fan motor.


DIAMETER 9"
NO. OF BLADES 5
ROTATION CW (Lead End/Viewing from rear of motor)

TOTAL Number of BLADES ON EACH FAN Blade is 5 as pictured.

Rotation: CW

* Aluminum Construction

Applications:

9 to 16 Watt Motors

Unit Bearing Motors with the 1/4" x 20 Threaded Shafts.

************TECH TIP****************

Fan Blade Rotation

To determine the blade rotation.

"CW" means Clockwise and "CCW" means Counter Clockwise

1.) Lay blade on a flat surface, either side up.

2.) The direction of rotation is determined by observing which blade edge touches the flat surface.

3.) If the Left side is touching the flat surface the blade is "CW"

4.) If the Right side is touching the flat surface the blade is "CCW".