● 10MHz 2 output as standard
(Default: Two 10MHz Sine waves)
・Right BNC connector: 10MHz Sine wave or 10MHz Square wave
・Left BNC connector: 10MHz Sine wave or 10MHz Square wave or 1pps Square wave
● True holdover function
● 12-digit frequency display (can
also display satellite reception status, UTC, etc.)
● High accuracy, high stability
● Very high sensitivity
● High speed satellite capturing
● The NMEA-RS232 signal is avalable
as standard, allowing the user to monitor the distribution of satellites over
the entire sky and the level of each signal
● Technical information document
included
● Rapid shipment from Tokyo, Japan
[High-precision, high-stability, high-purity master
clock for audio A/D device]
Use of the high precision, high stability and high
purity of the clock signal eliminates the sense of harshness in the high
frequency range (orchestra), and many users have testified to the clarity of
the sound.
[True holdover function]
A true holdover function is also provided, which is
a proof of high performance GPSDO. Even if the
satellite signal is interrupted by torrential rain or snowfall attenuation, or
if the satellite signal is removed, the 10MHz output frequency keeps high
accuracy without the slightest fluctuation. Of course, when the satellite signal
is recovered, it immediately returns to GPSDO mode. There
is no frequency fluctuation at all during the transition to and from holdover
mode.
On some conventional GPSDOs when the satellite lock
is lost, they have been unable to function as a frequency reference device
because the output frequency jumps or breaks but this unit continues to output
the exact 10MHz reference frequency with its automatic holdover function even
when the satellite signal is lost.
[12-digit frequency display]
High-precision display of the current output
frequency to the nearest 100μHz.
It is nice to see 10 to 11 zeros in a row, 10 000 000
000.0.
The LCD panel also displays other information such
as satellite reception status, UTC, and satellite lock information.
[10MHz 2 output as standard (Default: Two 10MHz Sine
waves)]
・Right BNC connector:10MHz Sine wave or 10MHz Square wave
・Left BNC connector:10MHz Sine wave or 10MHz Square wave or 1pps Square wave
Default is two 10MHz Sine waves. You
will need to specify when you order if you need the square wave.
[Very high sensitivity].
We have heard from several Trimble ThunderBolt
owners and users of other GPSDO that this unit has the highest sensitivity
(more satellites captured than others).
If the installation environment of the antennas is
the same, it means "higher sensitivity = stronger satellite lock = better
ability to maintain frequency accuracy".
[Fast satellite capturing]
This unit takes only a few minutes to capture
satellites. This is unmatched in speed.
Just a few minutes after power-on, the LCD display
will indicate that the unit has captured the satellite.
In addition, this unit outputs all signals shortly
after power-on.
[NMEA signal output]
This unit has an NMEA signal output and
works as a GPS/NMEA signal receiver.
Some free software can be used to monitor
the NMEA signals. (The NMEA capability is Talk only, does not accept Commands.)
By connecting this GPSDO to a Windows PC
via RS232 cable, you may monitor the distribution of satellites over the entire
sky, each signal level, signal-to-noise ratio, high precision position
information, etc.
If your PC does not have an RS232 port, you
can also connect via USB port. In that case, use the "RS232-USB converter
cable".
The instructions for connecting to a PC and
setting up the recommended NMEA software are given in the instruction manual.
*We check the NMEA output capability before
the shipment by our Windows 10 PC and attach the data as a performance data of
the product.
We can assure that this unit outputs NMEA
data but since the operation of software is dependent on the computer used, it
does not necessarily mean that we can guarantee that it works on all computers.
[Strict Product Inspection]
This product is delivered to you after rigorous
inspection and verification.
The inspection includes NMEA signal analysis to
check the distribution of satellites over the entire sky, each signal level,
S/N ratio, and so on.
This also confirms the performance of the receiver
circuit and the antenna's directivity pattern over the entire sky.
The test data will be included in the delivery.
[Specification]
・10MHz output on right BNC: Sine
wave +13.5Bm±2dB (3.0Vp-p, 1.1Vrms into 50Ω load)
Or 10MHz square wave: TTL (>3.5Vp-p
into 50Ω load)
・10MHz output on left BNC: Sine wave +11.5Bm±2dB (2.4Vp-p into 50Ω load,
0.84Vrms)
Or 10MHz square wave: 3.3V TTL
(>2.5Vp-p into 50Ω load)
or 1pps square wave: 3.3V TTL (>2.5Vp-p into 50Ω load)
・RS232 output: GPS NMEA signal (pin
2, 9600bps)
・1PPS output (pin 9): square wave
3.3V logic level (>2.5Vp-p into 50Ω load)
・GPS antenna supply voltage: DC 3.3
to 5 V
・Power supply: 100V to 240V, 47 to
63Hz (Required power is 12V 1.5A)
UL, FCC,
BSMI, PSE, RoHS
・DC jack: Inside diameter: 2.1mm,
External diameter: 5.5mm
・Dimensions (W x H x D): 108 x 60 x
125mm (excluding protrusions)
・Weight: Approx. 600g ( The power
adapter is about 150g separately)
*This GPSDO is brand new and unused, but only the
OCXO is a proven used product.
[Standard accessories]
・English instruction manual
・GPS antenna (cable length: approx.
3m)
・12V power adapter (100V to 240V,
47 to 63Hz)
・Technical information documents (Individual
satellite signal strength graphs/celestial distribution maps, and other useful
technical information)
* Shape of AC adapter plug is like the one in the
posted picture.
You may need to use an adapter to fit to your wall
outlet.
[Shipment]
-We deliver our products by EMS (Express
Mail Service) to countries where EMS is available and by ePacket to countries
where ePacket is available even when EMS is not available.
-As of Jun. 10, 2024, EMS service is available to following countries:
USA, Canada, Mexico, Some Central American
countries, Argentina, Brazil, Some South American countries, Most of Asian countries, South-Africa
Some African countries, New Zealand and Australia
If you are unsure, please inquire about the
availability of delivery to your area before placing an order.
You may need to pay duty/tax associated with the
importation of this product.
We will let you know the EMS tracking number so that
you can track and know when you can receive the package.
The expected delivery period to your location in USA
is about 1 week, and most of rest of countries 10 to 14 days but it may vary
by your location. Presently,
[Returns]
In case of DOA (Defect On Arrival):
Please contact us as soon as possible when you find
the product has defect on arrival.
We will reship the replacement unit or refund the
money as you like.
In case you send back the failed unit, we ask customer
to once pay the EMS fee.
We will refund the money together with the return
EMS fee when we receive all the original items we shipped.
If item is not as described and you want to cancel
and return:
Please contact us within 7 days from receipt of the
package.
With our consent, you can send it back to us and we
will refund the amount of money we received from eBay after we receive all the
original items we shipped.
In this case, you need to pay the return EMS fee.
If you have any questions, please feel free to ask
us.
Thank you.