Product SKUs
MBD-X11SBA-LN4F
Form Factor
Mini-ITX
Dimension
6.7" x 6.7" (17.02cm x 17.02cm)
Processor
- Intel® Pentium™ Processor N3710
- Single Socket FCBGA-1170 supported, CPU TDP supports Up to 6W TDP
- Up to 4 cores, 4 threads / 2MB Cache
System Memory
2 DIMM slots
Up to 8GB Unbuffered non-ECC SODIMM, DDR3-1600MHz
Max total memory up to 8GB only
Memory Type
1600/1333/1066 MT/s non-ECC DDR3 SODIMM Unbuffered 204-pin gold-plated DIMMs
DIMM Sizes
2GB, 4GB, 8GB
Memory Voltage
1.35V
On-Board Devices
System on Chip
SATA
SoC controller for 2 SATA3 (6 Gbps) ports
IPMI
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Audio
ALC 888S HD Audio
Graphics
0 ASPEED AST2400 BMC port(s)
0 SoC port(s)
Intel HD Graphics via SoC
Network Controllers
Quad LAN with Intel® Ethernet Controller I210-AT
Single LAN with Realtek RTL8211E PHY (dedicated IPMI)
Input / Output
SATA
2 SATA3 (6Gbps) port(s)
LAN
4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
7 USB 2.0 port(s) (4 via header; 2 rear; 1 Type A)
2 USB 3.0 port(s) (2 rear)
Video Output
1 VGA port(s), 1 DP (DisplayPort) port(s), 1 HDMI port(s)
Serial Port
2 COM Port(s) (2 header)
DOM
1 SuperDOM (Disk on Module) ports
TPM
1 TPM Header
Expansion Slots
PCIe
1 PCIe 2.0 x1 (in x8 slot)
1 Mini-PCIe with mSATA support
System BIOS
BIOS Type
AMI UEFI
BIOS Features
ACPI 5.0
UEFI 2.3.1
Plug and Play (PnP)
SMBIOS 2.7.1
DMI 2.3
USB Keyboard support
RTC (Real Time Clock) Wakeup
Software
SuperDoctor® 5, NMI, KVM with dedicated LAN, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software
SuperDoctor 5, IPMIView for Linux/Windows
Power Configurations
Power-on mode for AC power recovery, ACPI Power Management
PC Health Monitoring
Voltage
VBAT, System temperature, System level control, Supports system management utility, Memory, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED
Standby alert LED
CPU / System Overheat LED
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
FAN
2x 4-pin fan headers (up to 2 fans)
Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features
WOL, UID, System level control, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 12V DC or ATX Power Source, 4-pin 12v DC power connector