Features:
l Refueling amount: 3-5 drops/time. Can't add more, adding more will lead to unsatisfactory smoke effect
l When the amount of smoke is insufficient, please add smoke oil in time to prevent dry burning, otherwise the smoke generator may be burned.
l Consumables: use Henglong tank special smoking oil or electronic cigarette oil
l Operating instructions:
1. Connect the signal wire of the smoke emitter to the receiver, the red wire-the PWM signal; the black wire-the positive power of the receiver
2. Turn on the remote control first, then turn on the receiver, otherwise the smoke generator may keep rotating after the receiver is turned on until the remote control is turned on.
3. Description of the working status of the smoker: After starting, the smoker is in the standby state (will not operate); touch the throttle lever, the smoker enters the idling state; the throttle lever moves up and down, and the speed of the smoker changes accordingly. After the throttle stick does not move for about 15 seconds, the smoke generator enters the standby state until it touches the throttle stick again
l Suitable for most models of remote control climbing cars, military trucks, dump trucks, drift cars, boats, etc.
Specifications:
l Voltage: 7.4V-11.1V
l Size: 65*40*47mm
l Weight: 135g
Package Include:
l Generation Smoker*1
l Split Air Pump*1
l Control Circuit Board *1
l Silicone Tube*1
l Battery Adapter Cable*1 (default T plug)