eBay

Sweetwater is an Authorized Yamaha Dealer

Genuine New Item
Sweetwater's 2-year warranty

Yamaha DZR12-D 2000W 12 inch Powered Speaker with Dante

2,000-watt Powered PA Speaker with 12" LF Driver, 2" HF Driver, Built-in 2-in/2-out Dante Interface, and DSP (each)

Power, Performance, and Easy System Integration

The Yamaha DZR12-D offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier and a 39Hz–20kHz frequency range, and it can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while an intuitive LCD display makes dialing in your settings a piece of cake. Built-in Dante capabilities enable smart system integration with Yamaha consoles and other Dante devices. The DZR12-D also operates effectively as a stage monitor. The DZR12-D employs a lightweight yet durable plywood cabinet with a premium-grade polyurea coating.

Sophisticated DSP processing

At Sweetwater, we're impressed by the DZR12-D's intelligent DSP processing. Yamaha's Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR12-D to its highest output level. D-Contour features two settings, FOH/Main and Monitor mode, allowing you to fine-tune the DZR12-D's sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR12-D remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

DZR315 model shown.

Custom-designed transducers

The Yamaha DZR12-D is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful yet lightweight neodymium magnet to handle the chest-thumping low end that the DZR12-D delivers. The DZR12-D isn't just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

Built-in Dante capabilities

Integrating the DZR12-D with Yamaha consoles and other Dante devices is a breeze. The DZR12-D features a built-in 2-in/2-out Dante interface, along with sample rate conversion, allowing 48kHz device compatibility. Benefit from simplified patching with Yamaha's CL/QL digital consoles from their I/O device display, while TF console users can select Quick Config for fast, easy setup. You can also combine the DZR12-D's Analog I/O with Dante I/O, supplying you with flexible routing and system configuration. Or use the Dante break-In and break-Out function to act as a simple I/O box. Beyond that, Yamaha’s ProVisionare Control software for Windows and ProVisionare Touch for iPad are also Dante compatible, giving you added remote management of your system.

Console sold separately.

Smart, ultra-flexible design

The Yamaha DZR12-D integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90° x 60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR12-D's constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

High-power Class D amplifier

Loaded with 2,000 watts of Class D power, the DZR12-D is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR12-D can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching-mode power supply. Beyond that, this amp was optimized to match the DZR12-D's transducers, ensuring top-tier sound quality.

Yamaha DZR12-D Powered Speaker Features:

2-way powered loudspeaker with 2" HF and 12" LF drivers
Boasts a high-power 2,000-watt Class D amplifier and 39Hz–20kHz frequency range
Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
FOH/Main and Monitor modes allow you to fine-tune your sound based on your application
DSP protection safeguards your power supply, power amplifiers, and transducers against damage
Optimized factory presets and intuitive LCD screen make operation easy
Great-sounding, custom-designed transducers
Built-in 2-in/2-out Dante interface enables smart system integration with Yamaha consoles and other Dante devices
Rotatable horn allows vertical or horizontal mounting
90° x 60° dispersion from a vertical position
Constant directivity horn supplies smooth, level coverage without roll-off
Universal switching-mode power supply offers maximum power, along with stable, worry-free operation
Lightweight yet durable plywood cabinet with a premium-grade polyurea coating

Specification	Detail
Powered	Yes
Power Configuration	Bi-amped
Channels	2
LF Driver Size	12" cone
HF Driver Size	1" throat compression driver
LF Driver Power Amp	1000W Class D (peak)
HF Driver Power Amp	1000W Class D (peak)
Total Power	2000W Class D (peak)
Inputs	2 x XLR-1/4" combo
Outputs	2 x XLR
USB	1 x Type A
Other I/O	2 x EtherCON (Dante)
Frequency Range	39Hz-20khz (-10 dB)
Crossover Frequency	1800 Hz
Maximum Peak SPL	139 dB SPL @ 1m
Horizontal Coverage Angle	90 Degrees
Vertical Coverage Angle	60 Degrees
Signal Processing	EQ, Delay
Enclosure Material	Plywood
Mounting Options	Pole Mount with 1.37" socket, Floor Wedge, 12 x M10 Fly Points
Power Source	Standard IEC AC cable
Height	25.4"
Width	16.1"
Depth	15.5"
Weight	47.2 lbs.

RETURN INFORMATION

We want you to be completely happy with your purchase from Sweetwater. If you are not satisfied with your product, you may return it for a refund of the purchase price within 30 days. If your purchase was eligible for Free Shipping, the shipping cost will be deducted from your credit or refund. Returns must be in the complete and original packaging with all accessories and complete documentation (Owner's Manual, warranty card, quick start guides, etc.), show no signs of wear or use, and include a Return Authorization number or be subject to a restocking fee.