Welcome. Thanks for stopping in. Up for sale is a Music Man 210-75 (2275 Chassis) Combo Amplifier restoration. This unit is SN-BN13146 manufactured in the USA in the late 1970s, early 1980s, most likely 1980. This amp was in fairly good condition prior to restoration, now in very good condition. This amp puts out plenty of power and is surprisingly heavy for its size. I played professionally (years ago) with a 210-65 and it had power to spare in all but the largest venues. This amp is coming off some very light studio use.

This amp is equipped with two channels. Channel One is provided with High and Low inputs, Volume, and Bass and Treble tone controls. Channel Two is provided with High and Low inputs, Volume, Bass, Middle, and Treble tone controls, Reverb, Tremolo Speed and Intensity controls, Master Volume, and Bright and Deep switches. Plenty of options for tone shaping. The Power Switch is provided with High and Low Power positions, and a Standby Switch is provided on the back panel. The Reverb and Tremolo can be activated with the original footswitch hooked up through RCA jacks on the pack panel, and additionally, also on the back panel, a speaker impedance switch is provided allowing for both 4 and 8 ohm output. 1/4" Jacks are provided for both internal and external speakers (wired in series). This amp achieves clean output up to 28.9 Watts RMS on low power and up to 61.5 Watts RMS on high power. This amp is equipped with vintage Sylvania 6L6GC-STRs. The Power and Output Transformers and nearly all the circuitry are original with the exception of the new power supply and larger electrolytic capacitors. The amp is equipped with the original 10" Speakers (8 ohm each, 4 in parallel). This amp sounds great, has low noise, has been burned in, and tested. This amp is provided with a copy of the original schematics.

The original Tolex has been repaired and cleaned, has new Black/Silver/White Grill Cloth, new chrome Corners, new Feet and Casters, and the original Handle and Amp Straps. The Logo (Badges) have been repainted. At 55 pounds, it takes some muscle to get this around town. A new black canvas cover is included and will keep this amp looking its best.

This amp includes safety and protection upgrades including an AC line safety capacitor (installed on the ground switch), and fusing for the accessory outlet. The back panel has been modified to accommodate the new fuse holder (which matches the original). Input/Output Jacks and potentiometers have been cleaned. There are minor scratches, imperfections, fading, and metal oxidation typical of an amp over 40 years old.

The return period for this unit is fourteen (14) days after confirmed delivery from UPS is received. During this period, you may return the unit for any reason. Due to the effort that was required for this restoration, it is important that SLA Restorations LLC understands why the unit is being returned, so SLA Restoration LLC simply asks that the buyer provide a detailed explanation as to why the unit is being returned. The unit must be returned undamaged, unabused, unaltered, fully operational, in the original packaging, and with all the original paperwork. Return shipping is paid by the buyer. A full refund (excluding return shipping) will be given only after verification of these terms have been complied with. SLA Restoration LLC will not be responsible for any damage during return shipping therefore it is highly recommended that insurance be purchased by the buyer. Failure to comply with these terms can result in up to a 25% restocking charge, at the sole discretion of SLA Restoration LLC.

The warranty period for this unit is thirty (30) days after confirmed delivery from UPS is received. This warranty is valid only to the original buyer. The warranty covers all parts, work, and modifications installed/performed on the unit by SLA Restoration LLC. This warranty does not cover failure of any original vintage parts. Return shipping for warranty service is paid by the buyer. The unit will be evaluated by SLA Restoration LLC upon return, and the buyer will be notified as to the cause of the failure prior to repair. SLA Restoration LLC will repair/replace the parts, work, and modifications performed originally by SLA Restoration LLC and return the unit to operating condition free of charge to the buyer and return the unit to the buyer. If the cause of the failure is determined to be the failure of a vintage part not covered by this warranty, the buyer will be responsible for the cost of parts and labor to return the unit to operational condition or can elect to have the unit returned without repair. During the warranty period, the unit must be returned to SLA Restoration LLC for repair. Attempts at repair by the buyer or by any other person will void this warranty. A detailed explanation of the problem(s) is required prior to the unit’s return. The unit must be returned to SLA Restoration LLC undamaged and unabused, unaltered, unmodified, in the original packaging, and with all the original paperwork. SLA Restoration LLC will not be responsible for any damage during return shipping therefore it is highly recommended that insurance be purchased by the buyer. SLA Restoration LLC will make every attempt to repair the unit, unfortunately, there may be vintage parts that cannot be replaced with modern alternatives. If for some reason a vintage part has failed that cannot be replaced, the unit will be returned to the buyer unrepaired. Return shipping to the Buyer after warranty service is paid by SLA Restoration LLC.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY LOSS OR DAMAGE ARISING DIRECTLY OR INDIRECTLY FROM THE USE OF THE PRODUCT OR FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. EXCEPT FOR THE FOREGOING AND THE LIMITED WARRANTIES DESCRIBED, SELLER MAKES NO EXPRESS WARRANTY WITH RESPECT TO ANY PRODUCTS SOLD to buyer AND SPECIFICALLY EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

No other warranties are expressed or implied.

Thanks for looking :)