For Toyota Smart Keymaker OBD for 4D chip(Support for Toyota Lexus Smart Key)
Top 6 Reasons To Get Toyota Smart Key Maker OBD:
1.Safe and Efficient: Only need 20 seconds to add one key
2.It is safe for the security alarm system
3.Support all kinds for Toyota/Lexus smart key system: support K line and CAN-BUS protocols
4.It is the most safe and fast key programmer device for Toyota/Lexus series till now.
5.It supports all key lost
6.Please read the operation instructions and important notice before making a key
For Toyota
Smart Keymaker OBD for 4D Chip support for Toyota and Lexus smart key
system,support K line and CAN-BUS protocols.It is a safe and fast key
programmer for toyota and lexus 4D chip.It can only work for 4D chip and
smart key.
Function:
1.Use the main key to add the other keys:
Connect
the programmer to the OBD port of the car, there are some short beep
sounds after power on, it enters auto search car status.
Press
the start button twice to wake up the anti-theft module. When the
connection with the module is done successfully after 7 seconds, there
is a long beep 4-5 sounds (4 sounds means the system is IV K system, 5
sounds means V CANBUS system). Wait 30 seconds, there are a long beep
sounds, it means the car enter into add key state.
2.Add smart key:
put
the original car key (with the logo side) access to the start button,
you should hear two beep sounds. SEC light will flash twice; within 5
seconds, put the key close to the start button, you should hear 2 beep
sound, SEC light will flash twice; after learn all the smart key, wait
30 seconds till SEC light begin flash, and the car will close adaptation
mode automatically.
3.All the key was lost or only have vice key, need to do initialization:
Press
constantly the LED button, and plug into the OBD port of the car, after
two short beep sounds, finish press, it enters into auto search car
status.
Press the start button
twice, in order to wake the anti-theft computer. When the connection
with the Computer of car is done successfully after 7 seconds, there is a
long beep 4-5 sound (4 sounds mean the system is IV K system, 5 sounds
mean V CANBUS system), 5 seconds later, LED light go out. Wait 10-16
minutes,there are a long beep sounds, and LED light flicker, it means
the car enter into study key state.
All
keys lost matching mode: Add every smart key which need to program(with
the logo side)access to the start button, meanwhile you will here two
beep sound. SEC light will shine twice; After you finisher studying all
the smart keys, wait 30 seconds till SEC light shining, the system will
Auto-close study state
For Toyota Smart Keymaker OBD Notice:
1.Must use the right new smart keymaker, and follow the right step above, otherwise you take the consequences.
2.If
the device can not match the key, and LED light shining constantly, pls
clear the error code by using anti-theft system such as T300.
3.After
finishing program keys, the key can strat but the SEC light is still
turn on, maybe you use the vice key, only main key can manually shut the
study mode.
4.Don`t try to open the cover of programmer and dash board, otherwise you take the consequences.
5.This machine is only provided for the legal auto repair. Otherwise you will take the above consequences.
Package list:
1 x for Toyota 4D Chip OBD2 Keymaker