Replace your garage door bottom seal
|
|
|
|
|---|---|---|---|
Step 1 Remove the old garage door sealLift the garage door to about 6 ft. high and pull the old garage door bottom seal out through the gap behind the door track. | Step 2 Clean the trackScrape dirt and corrosion out of the garage door bottom seal track with a screwdriver and a stiff brush. | Step 3 Straighten the trackPry open the slots that serve as a track for the bottom rubber gasket on either end of the garage door, using a screwdriver. Straighten the tracks along the bottom of the door with the screwdriver to make it easier to insert the new garage door seal.If your door currently does not have the ability to accept this style of weather seal, consider replacing the bottom retainer on the door. | Step 4 Lubricate the rubber and installMix a drop or two of dish detergent or other soap in a spray bottle filled with water. Spray the soapy mixture on the track and new gasket to serve as a lubricant. To make it easier to feed the new gasket onto the track, hold the gasket at the same level as the track about 12 inches outside the door, then push and pull the new garage door bottom seal into the track. |
Rubber seals are made of durable black EPDM synthetic rubber, and is more durable and and flexible than vinyl, and withstands extreme weather temperatures ranging from -40 to 240 degrees. Get passed the Low Temperature Flexibility, Aging Resistance Test and Bottom Anti Seepage Test
Reference Another installation method
|
|
|
|
|---|---|---|---|
step 1Align your track with the rubber strip | step 2plug in the T-end side rubber at one end | step 3and squeeze in the other T-end side | step 4You can install it step by step with the aid of a screwdriver |
This garage door bottom seal is made from high-quality rubber for long-lasting use. It resists tearing, deformation, and the effects of daily use and weather conditions. With excellent resistance to oxidation and UV rays, it maintains its elasticity and performance even in extreme temperatures
Our garage door seals feature a 7-layer insulation circular design. It effectively blocks air, moisture, and dust from entering your space, enhancing the efficiency of your door and window seals. Plus, it adds resilience to withstand wind forces and reduces the chance of outdoor drafts.
This garage door weather seal comes with track retainers, screws, and a user manual for easy assembly. As the aluminum track retainer kit is designed in sections, ensure accurate alignment during installation to prevent any issues. There is no need for complex tools or professional skills.
