Pneumatic Spring Length 5 29/32in - 35 27/32in Gas Strut 60N - 1200N Universal

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


OFFER: 15% discount for orders of 4 pieces or more

The gas springs are sent without connection accessories, as shown in the technical drawing. You can find the end pieces of the gas pressure springs in the product description below.

Do you need the gas strut you choose to be shorter or longer than the extended length? Below you will find alternative advertisements and click on the details under the (Ø) diameter symbol.
Gas pressure spring without end piece
  O Length (from ∼ to)Newton (from ∼ to)
6/1590 ∼ 375mm50 ∼ 400 N M6
8/18140 ∼ 700mm50 ∼ 800 N M6
10/22150 ∼ 860 mm60 ∼ 1200 N M8
10/22235 ∼ 885mm100 ∼ 1000 N M8
Gas spring with eyelets
  O Length (from ∼ to)Newton (from ∼ to)
8/18180 ∼ 750mm50 ∼ 800 N M6
10/22190 ∼ 950 mm60 ∼ 1200 N M8
10/22275 ∼ 925mm100 ∼ 1000 N M8
10/22205 ∼ 965 mmr  60 ∼ 1200 N M8
14/28330 ∼ 1125mm500 ∼ 2500 N M10

       Gas pressure spring with ball joint

Gas pressure spring with ball socket
  O Length (from ∼ to)Newton (from ∼ to)
8/18190 ∼ 750mm50 ∼ 800 N M6
10/22200 ∼ 960mm60 ∼ 1200 N M8
  O Length (from ∼ to)Newton (from ∼ to)
8/18175 ∼ 735mm50 ∼ 800 N M6
10/22            295 ∼ 945mm        100 ∼ 1000 N M8 


You can find alternative connection accessories below. (To shorten or extend the gas spring length.)

        eyeletsball socketBall joint   ClevisP.Ball joint  Joint headP. Ball headrenewal

The matching mounting plates can be found below.

                For eyelets           For ball socket


Installation instructions

    ● To ensure optimal performance, the gas spring must be installed with the piston rod facing downwards.
    ● The warning sign or serigraph should not be removed.
    ● When checking the gas springs, the piston must be directed downwards.
    ● The piston rod should be protected from dust, paint and damage.
    ● The gas spring should not be mechanical, modified or damaged.
    ● Extension speed VS2: 0.1 - 0.3 (m / s)
    ● Gas spring operating temperature range: -30°C to 80°C.

Technical information
You can find exact data for the respective gas pressure springs in the technical drawing. 

    ● Overall length: 190mm ∼ 910mm
    ● Hub: 70mm ∼ 425mm
    ● Power: 60 ∼ 1200 Newtons
    ● Cylinder: Ø 22mm
    ● Piston rod: Ø 10mm
    ● Thread: M8
    ● Thread length: 10mm
    ● Eye Hole: Ø 8mm
    ● End position cushioning: 40mm

guarantee

If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross negligence, product liability and in the event of breach of essential obligations that endanger the achievement of the purpose of the guarantee.

warranty processing;
To help you as quickly as possible when contacting your Ausmachine customer service, please have the following information ready;
- Original invoice (incl. Date of purchase, name and address of the dealer and the full type designation of the product)
- Serial number for gas spring (all Ausmachine gas springs are provided with a serial number)

warranty period;
Two years after the initial purchase of the Ausmachine product.

If guarantees are advertised, the details can be found in the guarantee conditions. If there are defects in the purchased item delivered or the mechanical product purchased, you are entitled to statutory warranty rights. Your statutory warranty claims are not restricted by a guarantee.
If, in exceptional circumstances, a defect occurs, Ausmachine will, at its discretion, repair the product, replace it or refund the purchase price of the product. The product can be exchanged for the same model or for a model with at least comparable equipment. This can be a product prepared according to the manufacturer's specifications, which corresponds to a new product in terms of performance and functionality. Replacement or repair of the product does not create a new warranty. All Old Products and parts replaced become the property of Ausmachine. Further claims are excluded. This applies in particular to claims for damages, regardless of the legal basis on which they are based. The exclusion does not apply in the event of injury to life, body or health, in cases of intent and gross n
Marke Ausmachine
Garantie 2 Jahre
Besonderheiten Newton, Kraft, Länge, Zylinder
Thema Gasdruckdämpfer
Herstellernummer 150-910-1022M8
Gehäusedurchmesser 22mm
Produktart Gasdruckfeder, Gasdruckdämpfer
Hub 70mm ∼ 425mm
Länge 190mm ∼ 910mm
Material Stahl Gasdruckfeder
Abteilung Gasdruckfeder
Kolbenstangendurchmesser 10mm
Angebotspaket Nein
Ausschubkraft 60N ∼ 1200N
Markenkompatibilität2 Gasdruckfeder
Produktlinie Gasdruckdämpfer, Gasdruckfeder, Gasfeder
Modifizierter Artikel Nein
Gewicht 0,25-0,75 kg
Gewindedurchmesser 8mm
OE Nummern Gasdruckdämpfer Gasdruckfeder Gasfeder
Schlüsselweite 11/32
Anzahl der Einheiten 1
Endlagendämpfung 40mm
Maßeinheit Einheit
Einbauseite Beidseitig
Markenkompatibilität Kraft & Gesamtlänge & Durchmesser
Herstellungsland und -region Türkei