JHEMCU SPP-SBUS 8CH SPP Signal Converter PPM PWM SBUS Conversion Module 3.3-20V for DIY RC Airpanle Drone FLYSKY IA6B FRSKY X8R Receivers
Features:
1. The high-performance SPP converter, the module's wide voltage design supports up to 20V input, and adopts 32-bit single-chip microcomputer to complete signal acquisition, processing and conversion.
2. The stability and speed are far superior to ordinary 8-bit single-chip microcomputer, and the input signal is automatically recognized without manual.
3. Switch, plug and play, status indication is simple and clear, support 8 channels of input / output.
Specifications:
Brand Name: JHEMCU
Item Name: Signal Converter
Input voltage: 3.3-20V
Current: 15mA
Dimensions: 21*21mm
Weight: 4.1g
Channel: 8CH
Input signal:
PPM (CPPM)
PWM (common receiver signal)
SBUS (including futaba-R7008SB series, FrSky, etc.)
Features:
Input SBUS signal and output PWM and PPM signals simultaneously
Input PWM signal and simultaneously output PPM and SBUS signals
Input PPM signal and output PWM and SBUS signals simultaneously
Indicator light:
When there is no signal input, the three indicators are all on (PPM green, SBUS blue, PWM red).
The input signal indicator flashes and the output signal indicator is always on.
For example, when the PPM signal is input, the PPM corresponding indicator flashes green, and the PWM red and SBUS blue signal indicators are always on.
Channel description:
1-8 channels are PWM signal input or output channels.
SBUS channel is the SBUS signal input or output channel.
PPM channel is PPM signal input or output channel.
Wiring instructions:
When any one or more channels of the 1-8 channel input PWM signals, the corresponding PPM channel outputs the PPM signal, and the SBUS channel outputs the SBUS signal.
When the PPM channel inputs the PPM signal, it corresponds to the 1-8 channel output PWM signal, and the SBUS channel outputs the SBUS signal.
When the SBUS channel inputs the SBUS signal, it corresponds to the 1-8 channel output PWM signal, and the PPM channel outputs the PPM signal.
Note: the pins are self-welding
Package Included:
1 x SPP conversion module
1 x 8P*2.54MM*3 pin straight needle
1 x 8P*2.54MM*3 pin needles
1 x 6P*2.54MM pin needles
1 x 6P*2.54MM pin straight needle
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
