This is the mini ZVS suite, the package is very small, can not use ordinary battery power supply, it is recommended to high-power switching power supply, etc., 5 to 12 V power supply current will not be less than 5A! Note that the power supply to high-power power, power must be sufficient, the working voltage less than 5 V does not work, the current less than 5A does not work.
The operating voltage does not exceed 12 V or less than 5 V, only refers to the voltage when the circuit is work, not the output voltage of the power supply without load! more than 12 V or less than 5 V power supply, the circuit is prone to problems, the seller is not responsible!
12V power supply push high voltage package, power 60W or so, MOS tube does not heat, no extra heat dissipation. If used do induction heating, then do not work long hours, after all, limited power, induction heating, primary coil heating is relatively large, attention heat dissipation. make sure all components are soldered properly, the positive and negative of the power line are not connected, and after the load (heating coil, high voltage package), the power supply connected again! no electricity without tax! unloaded damage easily damage! no tax confirmed, the 2 MOS tubes are easy to conduct at the same time, and then the heat is burned out!
Maximum power 120 W (12 V induction heating) batteries, power supply must ensure that the work voltage is above 4.5 V! if you can not that the voltage above 4.5 V during work, do not use batteries or batteries! do not use dry batteries!
the width of the heated coil should be as high as 1/3 ~ 1/2 of the inside diameter of the heating coil, and the maximum not exceed 2/3!
Heating the diameter of the object as much as possible within the control of 20mm, too large heating will difficult to heat up red, after all, limited power.
induction heating, the general work of 5 minutes to power down cooling. because the induction heating
Current is relatively large, coil heating is relatively large. when heated, some of the heat is the heated object is passed to the heating coil. Long, the temperature of the heating coil is very high. like The heating coil is attached to the terminal, will melt the plastic part of the terminal!
1. tin welding pads are sturdy and can be subjected to repeated disassembly and disassembly, and it is not easy to fall;
2.1.6mm plates are thick and not dependent self-bending (ie bending under non-human conditions). poor plates will bend with time and environmental changes.
3. the impedance is stable and reliable;
Package Included:
1PC*ZVS Tesla High Voltage Generator High Frequency Induction Heating Machine Kit
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Ple
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.We will maill bakc within 24hours