Specification:
Transmitting power: 11dbm 
Emission current: 10MA 
Rate of fire: maximum 10KB / S 
Operating Voltage: DC 3V-24V 
Encoding : EV1527 1527 Learning code 
Each module has a unique ID address code. 
All modules K1-K4 four key code is the same. 

Working Voltage : DC3.3~5V 
Quiescent Current : ≤5mA 
Output current : 10 mA 
Working Frequency: 433MHz 
Receive Sensitivity: -108dB 
Working Temperature : -25~75 
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking 
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. 

[How to match the transmitter and receiver] 
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). 
LED turns on: learning mode is active. Press any button of the remote control. 
LED indicator flashes three times: learning successfully completed. 
3. Test: after the above operation , the receiver board can be controlled by the remote control. 
More transmitters with different IDs can be learned and stored additionally, starting with step 2. 
A mixture of different modes is possible. 

Button usage (sets mode and starts pairing process): 
Press once: Inching mode (Momentary Mode) 
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) 
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)

Package Included: 1 * Receiver Module 
                  1 * Transmitter Module、
                  2 * Black rubber line

Note:
1.Under the influence of light and the display, the color difference may decrease slightly.
2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding
   
 
Specification:
Transmitting power: 11dbm 
Emission current: 10MA 
Rate of fire: maximum 10KB / S 
Operating Voltage: DC 3V-24V 
Encoding : EV1527 1527 Learning code 
Each module has a unique ID address code. 
All modules K1-K4 four key code is the same. 

Working Voltage : DC3.3~5V 
Quiescent Current : ≤5mA 
Output current : 10 mA 
Working Frequency: 433MHz 
Receive Sensitivity: -108dB 
Working Temperature : -25~75 
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking 
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. 

[How to match the transmitter and receiver] 
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). 
LED turns on: learning mode is active. Press any button of the remote control. 
LED indicator flashes three times: learning successfully completed. 
3. Test: after the above operation , the receiver board can be controlled by the remote control. 
More transmitters with different IDs can be learned and stored additionally, starting with step 2. 
A mixture of different modes is possible. 

Button usage (sets mode and starts pairing process): 
Press once: Inching mode (Momentary Mode) 
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) 
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)

Package Included: 1 * Receiver Module 
                  1 * Transmitter Module、
                  2 * Black rubber line

Note:
1.Under the influence of light and the display, the color difference may decrease slightly.
2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding