ES1A THRU ES1J
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory Flammability Classification 94V-O
Glass passivated junction
High temperature soldering: 260 �J /10 seconds at terminals
Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA-481) Weight: 0.002 ounce, 0.064 gram
Ratings at 25 �J ambient temperature unless otherwise specified. Single phase, half wave 60Hz resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS | ES1A | ES1B | ES1C | ES1D | ES1E | ES1G | ES1J | UNITS | |
Maximum Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 150 | 200 | 300 | 400 | 600 | Volts |
Maximum RMS Voltage | VRMS | 35 | 70 | 105 | 140 | 210 | 280 | 420 | Volts |
Maximum DC Blocking Voltage | VDC | 50 | 100 | 150 | 200 | 300 | 400 | 600 | Volts |
Maximum Average Forward Rectified Current, at TL=120 �J | I(AV) | 1.0 | Amps | ||||||
Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load(JEDEC method) | IFSM | 30.0 | Amps | ||||||
Maximum Instantaneous Forward Voltage at 1.0A | VF | 0.95 | 1.25 | 1.7 | Volts | ||||
Maximum DC Reverse Current TA=25 �J At Rated DC Blocking Voltage TA=100 �J | IR | 5.0 100 | A | ||||||
Maximum Reverse Recovery Time (Note 1) | TRR | 35.0 | S | ||||||
Typical Junction capacitance (Note 2) | CJ | 10.0 | PF | ||||||
Typical Thermal Resistance (Note 3) | R KJL | 35 | �J /W | ||||||
Operating and Storage Temperature Range | TJ,TSTG | -50 to +150 | �J |
NOTES:
Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
Measured at 1 MHz and Applied reverse voltage of 4.0 volts
8.0mm2 (.013mm thick) land areas