Cooling type (internal cooling/external cooling): external cooling
Cutting diameter (mm): 6-75
Chip holding groove length (mm): 50
Useful length (mm): 50
Total length (mm): 64
Material: Diamond
Maximum cutting depth: 50
Blade size: 6-75
Features:
The tooth edge is sharp and much more durable than ordinary electroplated drilling tools (glass drills). It can be used for drilling hard and brittle materials such as marble, ceramics, cement, and ceramic tiles. The drilling is neat, smooth, and free of broken edges, without causing vibration. The cutting resistance is small, which improves the opening speed. After slotting, it is easy to decorate and debris removal is easy.
Attention:
Water must be added during the drilling process, and good cooling can prolong the service life of the drill bit
Do not dry the drill without adding water, otherwise it may cause damage to the drill bit
Suitable for drilling operations in marble, stone processing, granite quartz stone, ceramic tiles, etc
Operating instructions:
1. The hole opener is suitable for angle grinders, and can be directly used on hand drills and table drills with a connecting rod. As the hole opener does not have a center positioning drill bit, it must first slowly tilt at a 45 degree angle to contact the marble. After opening the crescent groove, use this crescent groove for positioning, and then drill vertically at a speed of about 800-1000 revolutions per minute
2. During the drilling process, coolant or water needs to be added to extend the service life. At the beginning of drilling, it is necessary to slowly contact objects and not collide with them. The working speed should be low (the larger the drilling tool, the lower the speed). When drilling through, pay attention to slowing down the speed
3. When the chip removal is not ideal, please stop working and clean it before starting work