SKU: 1500W-6090T1-USB+1500W-6090T2-USB+TS009USB

Description:

3D Router engraving machine parameters:

Model: 3D6090GZ

Outside dimension: 1150*970*650mm(L*W*H)

Working platform size: 1045*720mm(L*W)

Frame Material：The whole machine used 6061 aluminum profiles

Max. Feeding height: ≤140mm(From base of Z axis to platform)

X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z)

Sliding unit:

X axis:SFU1605 Ball Screws

Y axis:SFU1605 Ball Screws

Z axis:SFU1204 Ball Screws

Drive unit:

X axis: ø20 High intensity round rail,

Y axis: SBRø20 high-strength aluminum base rails

Z axis: ø12 high-strength round rail

Stepping motor: 57 two-phase 3A 

Driving Power for Stepping motor: AC220, 240W, out put: DC24V, 10A

Maximum Idle speed: 1500mm/min

Working Speed: 50-1500mm / min (different material with different speed settings)

Spindle motor: 1500W high-speed variable frequency spindle motor , ER11 chuck, with 6mm collet.

(tips：1. The spindle motor must connect with the VFD.

2. It cannot directly connect with the supply voltage (AC220V).

3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)

Drive of Stepping motor: 0-3.5A adjustable four-axis drive

(TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision)

Repositioning precision: ≤0.05mm

Cooling: Water-cooling

Speed: 0-24000r/m

Spindle precision: Radial runout ≤ 0.03mm

Carving command: G code / TAB file / nc file / NCC file

VFD: AC220V, 1500W, 0-400Hz (built-in control box)

USB Control box parameters

Protection: Emergency stop button

Recommend : fit for EMC2

Communication interface: through USB PORT connect with computer

support system: Windows XP / win7 with 32 bit

Input Volts: AC220V

Application industry:

Woodworking industry: sculpture, round carving, wooden handicraft processing

Advertising industry: advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products

Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet.

Feature:

1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood.

2. water cooling spindle works more stable and durable.

3. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle.

How to use:

1. Assembling and locating the 3D machine on steady desk well.

2. Make sure that your computer has a USB port output.

3. Place the control box in a ventilated dry place where there is no dust, no moisture

4. Connecting the control box with the 3D machine and you computer and make sure the plug will not come off.

5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller.

6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.

10. You can enjoy making you dream with using our 3D machine now.