Double Port M.2 SSD to Sata 7+15 22PIN Adapter Card M.2 to 2.5" SATA3.0 Expansion Card 6Gbps For NGFF 2230 2242 2260 2280 M2 SSD

Product Description:

You can insert 2 ssd at the same time, but you can only read one at a time.

Switch up to toggle NGFF2 to start working.

Toggle the switch down to NGFF1 to start working.

Note that the switch position must be consistent with the hard disc you want to read.

For example, You need to read NGFF1,

but you toggle the switch to the NGFF2 position that is certainly not read out!!!

Supported SSD: sata protocol hard discs in m.2 (also known as NGFF)

Note!!! Does not support nvme pci-e protocol m.2 hard drive!!!!

High-speed transfer performance

SATA 3.0 external transfer interface can reach a theoretical transfer rate of 6Gbps.

Full speed, the transfer rate is affected by the configuration of the device and the performance of the SSD hard drive. 

Slightly different from the theoretical data is normal.

This adapter card without chip does not affect the transfer speed.

How to distinguish between SATA protocol and NV ME protocol?

1. Check the label on the SSD to see if there is a NV ME or SATA logo on the SSD.

2. If there is no logo, please check the model number of the SSD to understand the SSD protocol.

Q1: Is it possible to have 2 different brands of hard drives loaded?

A: Yes, it is possible to use 2 different brands of NGFF SSDs.

Q2: Is it possible to use only 1 SSD position?

A: Yes, you can use only 1 SSD, just make sure the switch is toggled to the corresponding position when you use it.

Q3: Does it affect the transfer speed?

The theoretical speed limit of NGFF hard drive is 6Gbps.

However, The compatibility between different brands and models and computer devices is different.

Thus, the actual transfer speed varies.

Q4: Is it possible to install my own cable and SSD case?

After testing, our cables are compatible with most devices and are recommended to be used.