• 24 months warranty
  • Compressor Remanufactured In UK
  • All Compressors Nitrogen Pressure Tested
  • All Compressor Performance Tested
  • We Only Remanufacture O.E Compressors, We Do Not Rebuild Using Pattern Compressors
  • All Compressors Shipped With The Correct Amount Of Oil
  • Email Registration Number If You Would Like Us To Check Compatibility

RETURN OLD UNIT TO US FOR A £25 REFUND

WE HAVE ALL MAKES AND MODELS AVAILABLE, WE HAVE BEEN REBUILDING COMPRESSORS SINCE 2005.
 WE ARE A UK BASED BUSINESS.

Remanufactured air conditioning compressor, 24 months warranty Compressor must be fitted as per instructions in box to validate warranty (see below)

Suited for:

JAGUAR XE 2.0 PETROL MAR 2015 TO 2021.

JAGUAR XE 2.0 D DIESEL MAR 2015 TO 2021.

JAGUAR XE 3.0 PETROL MAR 2015 TO 2021.

JAGUAR XE 5.0 PETROL MAR 2018 TO 2021.

JAGUAR XF 2.0 PETROL MAY 2015 TO 2021.

JAGUAR XF 2.0 D DIESEL MAR 2015 TO 2021.

JAGUAR XF 3.0 PETROL JUL 2017 TO 2021.

JAGUAR XE 5.0 PETROL MAR 2018 TO 2021.

JAGUAR XJ SERIES 2.0 PETROL MAY 2012 TO 2021.

JAGUAR XJ SERIES 5.0 PETROL JUN 2017 TO 2021.

JAGUAR F TYPE 2.0 TI4 PETROL JUL 2017 TO 2021.

JAGUAR F TYPE 3.0 PETROL OCT 2012 TO 2021.

JAGUAR F TYPE 5.0 PETROL OCT 2013 TO 2021.

JAGUAR F TYPE 5.0 SCV8 PETROL DEC 2019 TO 2021.

JAGUAR F PACE 2.0 PETROL SEPT 2017 TO 2021.

JAGUAR F PACE 2.0 D DIESEL SEPT 2015 TO 2021.

JAGUAR F PACE 3.0 PETROL SEPT 2015 TO 2021.

JAGUAR F PACE 5.0 PETROL AUG 2018 TO 2021.

JAGUAR E PACE 2.0D DIESEL SEPT 2017 TO 2021.

JAGUAR E PACE 2.0 PETROL SEPT 2017 TO 2021.

LAND ROVER VELAR 2.0 P250 PETROL MAR 2017 TO 2021.

LAND ROVER VELAR 2.0 P300 PETROL MAR 2017 TO 2021.

LAND ROVER VELAR 2.0 D DIESEL APR 2017 TO 2021.

LAND ROVER VELAR 3.0 P340 PETROL MAR 2017 TO 2021.

LAND ROVER VELAR 3.0 P380 PETROL MAR 2017 TO 2021.

LAND ROVER VELAR 3.0 D275 DIESEL APR 2018 TO 2021.

LAND ROVER VELAR 3.0 D300 DIESEL MAR 2017 TO 2021.

LAND ROVER VELAR 5.0 PETROL JAN 2019 TO 2021.

LAND ROVER DISCOVERY SPORT 2.0 P250 PETROL MAY 2019 TO 2021.

LAND ROVER DISCOVERY SPORT 2.0 D DIESEL DEC 2014 TO 2021.

LAND ROVER DISCOVERY SPORT 2.0 PETROL AUG 2017 TO 2021.

LAND ROVER DISCOVERY SPORT 2.0 SI4 PETROL DEC 2018 TO 2021.

LAND ROVER DISCOVERY SPORT 2.0 P200 PETROL JUL 2020 TO 2021.

LAND ROVER DISCOVERY MK5 2.0 SD4 DIESEL SEPT 2016 TO 2021.

LAND ROVER DISCOVERY MK5 2.0 TD4 DIESEL SEPT 2016 TO 2021.

LAND ROVER DISCOVERY MK5 2.0 SI4 PETROL SEPT 2017 TO 2021.

LAND ROVER DISCOVERY MK5 3.0 SCV6 PETROL SEPT 2016 TO 2021.

LAND ROVER DEFENDER 2.0 P300SI4 PETROL SEPT 2019 TO 2021.

LAND ROVER DEFENDER 2.0D 240 SD4 DIESEL SEPT 2019 TO 2021.

LAND ROVER DEFENDER 2.0D 200 SD4 DIESEL SEPT 2019 TO 2021.

LAND ROVER EVOQUE 2.0 D DIESEL NOV 2015 TO DEC 2019.

RANGE ROVER SPORT/SPORT HSE 2.0 SI4 PETROL OCT 2017 TO 2021

RANGE ROVER SPORT/SPORT HSE 2.0 SD4 DIESEL AUG 2016 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 P360 MHEV PETROL JUN 2019 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 D250 MHEV DIESEL JUL 2020 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 D300 DIESEL JUL 2020 TO 2021

ROVER SPORT/SPORT HSE 3.0 D300 MILD HYBRID DIESEL JUL 2020 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 D350 DIESEL JUL 2020 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 D350 MILD HYBRID DIESEL JUL 2020 TO 2021 

RANGE ROVER SPORT/SPORT HSE 3.0 P400 MHEV PETROL FEB 2019 TO 2021

RANGE ROVER SPORT/SPORT HSE 3.0 PETROL APR 2013 TO 2021

RANGE ROVER SPORT/SPORT HSE 4.4 TD DIESEL APR 2013 TO 2021

RANGE ROVER SPORT/SPORT HSE 5.0 PETROL APR 2013 TO 2021

RANGE ROVER HSE/VOGUE/CLASSIC 3.0 D300 MHEV DIESEL JUL 2020 TO 2021

RANGE ROVER HSE/VOGUE/CLASSIC 3.0 P400 MHEV PETROL MAY 2019 TO 2021

RANGE ROVER HSE/VOGUE/CLASSIC 3.0 D350 MHEV DIESEL JUL 2020 TO 2021

RANGE ROVER HSE/VOGUE/CLASSIC 4.4 TD DIESEL AUG 2012 TO 2021

RANGE ROVER HSE/VOGUE/CLASSIC 5.0 V8 PETROL AUG 2012 TO 2021

Warranty and Fitting instructions

BEFORE FITTING THE COMPRESSOR PLEASE READ THE FOLLOWING

Visually inspect the new unit for any damage, visually check the replacement unit against the item on the car to ensure they are the same before removing old unit.

Remove compressor, drier and expansion valve.

Compare the old compressor and new compressor:

 

  1. Number of grooves.
  2. Pulley diameter.
  3. The pulley alignment measured from compressor body to middle of front groove.
  4. Measure the diameter of the suction and discharge ports on new and old compressor.
  5. On some compressors it may be necessary to swap manifold plate and wiring plug from old

 

  • Flush entire system with a flushing solvent.
  • Flush the line between the discharge port on the compressor and the condenser.
  • Flush the line between the condenser and the filter drier, if condenser is subcooled proceed to next point.
  • Flush the line between the filter drier and expansion valve/orifice tube depending on system.
  • Flush the line between the
  • Drain compressor to ensure it has the correct amount of oil, (if replacement compressor does not already have this information displayed).
  • Drain compressor to ensure it has the correct amount of oil, (if replacement compressor does not already have this information displayed).
  • Install the new filter drier.
  • Install the expansion valve or orifice tube
  • Now evacuate the system for 30 minutes minimum prior to leak testing. Ensure no leaks are present, check system operating pressures and temperatures, ensure the radiator/condenser fans work correctly. You must ensure the high side pressures are not excessive and that the low side is not too low.
  • When fitting clutchless type compressors it is sometimes necessary to have the fault codes removed from the computer memory otherwise the compressor may not receive the correct feed and will not pump.
  • There will be a reason why the original compressor failed and you must find and rectify this underlying fault otherwise the replacement will fail
  • YOU MUST ENSURE THE COMPRESSOR IS FITTED CORRECTLY AND TO THE INSTRUCTIONS OTHERWISE THERE WILL BE NO WARRANTY.

 

A C R Ltd Warranty Conditions:

 

  • The warranty period is for 24 months from date of purchase on all remanufactured compressors.
  • The compressor must be returned to ACR within the warranty period.
  • The compressor must be complete.
  • The following documentation will be required.

 

 

  1. Proof of purchase for receiver drier/condenser/expansion valve/orifice tube.
  2. Invoice from workshop/Engineer that carried out the installation.
  3. ACR Original invoice.
  4. The warranty form must be filled out.

 

The warranty period of 2 years are only valid if the product is mounted in accordance with our instructions and the product has not been dismantled or used in any way not intended for the product in question.

We will not honour claims for coverage of operational loss, loss of profit or time, or other indirect consequential economic losses.