BGM Pro Oil seal 31x62.1x5.8/3.5mm FKM/Viton® (E10/etahnol resistant) Metal (Extra Flat Oil Seal for Crankshaft Drive Side)
This component will fit the Vespa P 125 X VNX1T.
If you require this part for a model that is not in the listing title or listed below we strongly advise you to contact us first to avoid any disappointment or fitment issue.
Product Description
BGM PRO oil seal crankshaft PX (type extra flat with 3.5mm) made of high quality and ethanol resistant (E10) FKM/Viton®*.
EXTRA FLAT VERSION (31x62.1x5.8/3.5mm)
The shaft seal on the clutch side in its normal height (4.3mm) is a bit too high for many engine cases (e.g. Malossi).
Depending on the tolerances, as well as a possible spacer of the bearing, a shaft seal of conventional height can rest on the bearing inner ring.
Experienced mechanics have so far solved this problem by grinding down the oil seal.
The BGM shaft seal is a simple and practical solution.
With the reduced height (3.5mm instead of 4.3mm) they offer 100% sufficient distance to the bearing in every engine.
They are therefore compatible and applicable to any engine design.
WHY FKM/VITON®
The material FKM (fluorocarbon rubber) is extremely resistant to heat, friction and fuel/ethanol.
In Germany, current premium fuel already contains up to 5% ethanol admixture per se. In other countries, the ethanol/alcohol content is significantly higher.
Conventional shaft seals can swell or soften on contact with ethanol-containing fuels. BGM PRO FKM/Viton® shaft seals, on the other hand, offer perfect protection.
In addition, Viton is twice as temperature resistant as conventional (blue) NBR shaft seals, has very good gas impermeability and is also very resistant to aging.
WHAT IT IS SUITABLE FOR
An engine equipped with BGM PRO FKM/Viton® shaft seals can therefore also be operated with E10 fuel (10% alcohol content) without any problems.
The high-quality brown Viton®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds.
BGM PRO FKM/Viton® shaft seals are therefore suitable for all engines, whether original or tuned high-performance engine.
ADVANTAGES BGM PRO
The BGM PRO oil seals offer a double sealing as an additional feature. All oil seals that seal to the atmosphere have a so-called dust lip. This is positioned in front of the actual sealing lip and keeps dust, dirt and moisture out. This further increases the very good stability.
*Viton® is a registered trademark of DuPont Dow Elastomers
IMPORTANT DELIVERY INFORMATION:
Please note, the products listed here and within our Racing Planet UK eBay shop are located in our warehouse in Germany and will be ordered in and shipped from our UK warehouse and therefore has 3 day handling time however we are very confident that your order will be with you within the estimated time shown for delivery.
Racing Planet UK - Leading Supplier of Scooter Parts
Racing Planet UK are a leading supplier of scooter parts for a vast range of makes and models from Chinese Scooters to Piaggio's, Peugeot’s, Honda, Vespa, Aprilia, Yamaha's and many more., as well as low capacity scooters we also specialise in Maxi-Scooters and road legal geared bikes. We stock brands such as Malossi, Polini, Airsal, Tecnigas & Naraku to name a few and we specialise in parts for Peugeot, Kymco, SYM, Baotian, Piaggio, Yamaha, Honda, Aprilia and many many more.
Why choose us?
We stock a massive range of products from spark plugs, CDI units, rectifiers to pistons, cylinder kits, exhausts plus much much more. We supply standard replacement parts and modification aftermarket parts from leading suppliers and we are always adding to the range. We trade from commercial premises with customer service available face to face, on the telephone or by email. We aim to provide the best possible service so if you need assistance or you do not see what your looking for send us an email through eBay and we'll see if we can help.