Thermostatic Valve and Electric Actuator for Optimal Water Heating Temperature
DESCRIPTION


Feature:
*Intelligent water heating temperature controller set: actuator (normally open/normally closed) + DN25 thermostatic control valve body + LCD control panel
*Electric actuator: Electric actuator is mainly used to control the closing and opening of pipes in floor heating systems. It is specifically used in the electric drive part of the electrothermal actuator of the water collector branch valve, small valve, and dynamic balance valve. The operation is noiseless, and the nut connection installation method is simple, quick to install and easy to disassemble.
*Liquid crystal thermostat: With the popularity of intelligence, intelligent control systems are also becoming more intelligent, and central controllers and room temperature controllers have become core supporting products for system intelligence. Thermostats are divided into two types: mixed water thermostats and floor heating thermostats . As people improve their quality of life, traditional heating methods are changed in winter heating. Heating equipment is installed in the floor. The heat is emitted from the ground to make people feel more comfortable. The smart thermostat is an end control product developed to control this heating equipment. It can set the power on and off or the room temperature in different periods according to people's needs, thereby realizing intelligent heating.
*Straight automatic thermostatic control valve: It is a special valve for radiators. It consists of two parts: a thermostat controller and a valve body. The user turns the thermostat controller to the required set temperature. When the indoor temperature exceeds the set temperature, the thermostatic controller's internal temperature bulb (filled with temperature-sensing medium) expands due to heat, increases in volume, and pushes the valve stem. Close the valve, reduce the water inlet flows of the radiator, and make the room temperature reach the set temperature. When the indoor temperature is lower than the set temperature, the thermometer bulb shrinks due to cold, the volume decreases, and the valve core return spring pushes back the valve stem, causing the The valve is opened wide, increasing the water flows into the radiator, until the room temperature reaches the set value and the indoor temperature can be set as required.
*Multiple industry applications and scope: suitable for office buildings, shopping malls, hotels, schools, hospitals, residential areas, agricultural and drinking water renovation, government projects, etc.

Specification:
1.Electrothermal actuator
Control mode: normally open/normally closed
Engineering voltage: 230V (220V), AC24V10V
Ambient temperature: -5℃-60℃
Power consumption: 2VA
Shell material: flame-retardant PC (inner parts are flame-retardant reinforced PA66)
Full process time: 3-5mm
Thrust: 110N
Connection size: M30x1.5mm nut
Leads length: 90mm
Stroke: 3mm
Installation method: The installation position is vertical to 85°. Tilt angle
Shell protection grade: IP44

2.LCD thermostat
Power supply voltage: AC220V, 50/60Hz
Load current: 5A
Temperature sensing element:NTC
Temperature measurement range: 0℃-99℃
Timing error: <0.1%
Temperature control accuracy: ±1℃
Temperature control range: 10℃-35℃
Protection level: IP20
Power consumption: 2W
Shell material: flame retardant PC
Working environment temperature: -10℃-60℃

3. Thermostatic control valve
Valve body material: brass
Nominal diameter: DN25
Connection form: thread
Applicable temperature: -20℃≤T≤120℃
Working medium: heating
Nominal pressure: 1.6MPa
Implementation standard: GB/T8464-2008 standard

Packing list:
1*Electric heating actuator
1*LCD thermostat
1*Thermostatic control valve



Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 


Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.


DataCaciques